Calibration Tower PLA by Xeraj

Xeraj

3D Printer>Test Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

4.4(42)

0.2mm layer, 2 walls, 15% infill

3.9 h

2 plates

4.0(2)

Open in Bambu Studio

Boost

115

369

3.3 k

560

Released

Description

Test model PLA temp tower.

.3mf file contains encoded temperature changes

It is necessary to download the .3mf file in Raw models

Update:

Instruction:

Click on the “Download or Print” button
Then pick “Download STL”
Download “PLA_calibration_set_temp.3mf” file
Print.

Boost Me (for free)

Feel Free to Boost

Comment & Rating (59)

@CutMaster

Okay, for those like me, loading the 3mf file and having a sliced version not showing the temperature change, here are the steps to do it : 1) Click on slice 2) Go to Preview 3) Using the slider on the right, move down the upper one to the first layer at 215°, then right click on the plus button, choose "Add G-Code" and add this : M109 S215 Do that again on each starting zone when the temperature change, and change the "S215" part to the desired temperature in celcius.

@lawolgamott

Thank you for providing the much needed missing info!

@aibronman

Replying to @lawolgamott :

for what M stands for ?

@NickRowan

Replying to @aibronman :

M109 is the Gcode for "Wait for hotend temperature." The number after the S is the temperature in C.

@user_2406086356

Worked Well on the A1. Thank you!

@LK_Crea

Print Profile

0.2mm layer, 2 walls, 15% infill

had to manually adjust temperature but good test thank you

@user_3135616759

Print Profile

0.2mm layer, 2 walls, 15% infill

04mm nozzle and designer profile No problem

Show original

@drewcifer

Print Profile

0.2mm layer, 2 walls, 15% infill

worked like a charm

@sharkeyx

printed well, thanks! They all kinda look the same to me, and they each have the rope looking effect under the bridges, is there any way to get rid of that, or is that just how it is?

@Marnem

Works great, but quite large and hefty.

@Mr.Rex805

Can't figure out how to save the best setting after printing the tower. If I click the different filaments they all show the same although the test printed different temps

@A3jprint

Print Profile

0.2mm layer, 2 walls, 15% infill

nice

@warkmeekly

For everyone that is saying that the temp isn't showing in the slicer, read the instructinos. Don't just Download the STL or the 3MF. You have to click the "Download STL/CAD Files" button, then select the download for "PLA_calibration_set_temp.3mf" This version has the G code for the temps.