Stackable Shoe Rack by dave3ddiy

dave3ddiy

Household>Other House Models

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

Stackable Shoe Rack_0.2mm layer, 10 walls, 5% infill

4.1 h

1 plate

4.9(17)

Open in Bambu Studio

Boost

268

544

527

190

Released

Description

Download link is broken and thingiverse is not fixing it. To download, go below the thumbnails there is the section "thing files". Click on that and download the STL there.

Hi Everyone, This is a shoe rack design based off of my Monitor stand. This can be printed on a Prusa Mk3 Bed dimensions. You will need to print with no top and bottom layers. The pictured infill is 5% honeycomb with 9 perimeter layers.

For the piece of wood. You can use any 3/4 thick wood, plywood,mdf, laminate etc. The depth is 8 inches and the length is however long you would like.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

Supports:

Resolution:

Infill:

Filament:
prusament PETG or PLA Galaxy Black

Category: Household

Comment & Rating (25)

@hagosrush

Print Profile

Stackable Shoe Rack_0.2mm layer, 10 walls, 5% infill

works as expected. a very tight fit for the wood. could be trimmed a mm or two to make the fit easier but it fits regardless.

@vvojta

Boosted

Print Profile

Stackable Shoe Rack_0.2mm layer, 10 walls, 5% infill

Looks awesome and works well

@user_1896108163

Print Profile

Stackable Shoe Rack_0.2mm layer, 10 walls, 5% infill

thanks🙏🏿

@ProGolferChubbs

Print Profile

Stackable Shoe Rack_0.2mm layer, 10 walls, 5% infill

I modified it a bit to accommodate the size of the extra wood flooring scraps I had lying around, including the nosing for a nice front edge.

@kellyd88

awesome print. only thing I would recommend is instead of having 3/4 inch wood to update the design to an inch. hard to find 3/4 wood

(Edited)

@Groove

Print Profile

Stackable Shoe Rack_0.2mm layer, 10 walls, 5% infill

I had to stretch the hight to 103% to fit a 19mm thick piece of wood. the width is no problem for 200mm

@optimuspeach

Boosted

Print Profile

Stackable Shoe Rack_0.2mm layer, 10 walls, 5% infill

this was exactly what I was looking for to use with IKEA Berghult shelf for my Lego display. This also came in clutch for my kids’ play kitchen. ive searched on and off for almost a year to find shelves that fit inside perfectly. BOOM. solution found and my girls are amped about organizing their play fridge. thank you.

(Edited)

@PlasticPixel

its not showing me the honey comb pattern

@anony_rain

If you check the settings for the profile the top and bottom shell layers are set to 0. Once you slice the plate the solid surface will not be present and you'll see the pattern that is set as the infill pattern. The default pattern is rectilinear, but if you change it to honeycomb then you'll get the honeycomb pattern :D

(Edited)

@ProGolferChubbs

Replying to @anony_rain :

awesome explanation, I was also wondering how/why it looked different prior to slicing.

@ByrdAnthony

Print Profile

Stackable Shoe Rack_0.2mm layer, 10 walls, 5% infill

print profile was great. however I did end up designing my own (almost exactly the same). only thinner to save time and material. I didn’t think it needed to be 1” for only holding shoes.