bambu X1C\P1S 控温净化器-【筋斗云】


Print Profile(2)

0.28mm layer, 4 walls, 30% infill
0.28mm layer, 4 walls, 30% infill
Designer
P1S, P1P, X1, X1 Carbon, X1E, A122.4 h
5.0
TPU gasket——0.2mm layer, 4 walls, 30% infill
TPU gasket——0.2mm layer, 4 walls, 30% infill
P1S, P1P, X1, X1 Carbon, X1E, A124 min

437
791
88
746
79
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Description

2024-0226更新
很多人提到机箱风扇出口的转接头固定螺丝型号,我是取自拓竹附送的配件包内具体哪个包忘记了,所以我提供螺丝的照片和尺寸

A lot of people mentioned the chassis fan outlet adapter fixing screws model, I was taken from the Top Bamboo included in the accessories package specific which package forget, so I provide photos and dimensions of screws

 

 

详细介绍都在视频里https://www.bilibili.com/video/BV1Rw411m7kg/?spm_id_from=333.999.0.0

3D打印机在打印中都会产生pm各种直径的颗粒,甚至很多廉价耗材或者高性能耗材都会在打印中产生有毒有害气体,而打印机很多时候是几乎24小时候运行,玩打印机更需要关注呼吸健康,所以为了解决我自己问题于是我设计了这款控温净化器,我现在几乎每次打印都在使用,降噪、控温、净化很不错,如果你有兴趣正好可以帮到你,欢迎随时直接一键打印。(deepl translation:3D printers in the printing will produce pm various diameters of particles, and even a lot of cheap consumables or high-performance consumables will produce toxic and harmful gases in the printing, and printers are often almost 24 hours a day to run, play the printer need to pay more attention to the respiratory health, so in order to solve my own problems so I designed this temperature-controlled purifier, I'm now using it almost every time I print, noise reduction, temperature control Purification is very good, if you are interested in just can help you, welcome at any time directly a key to print!

 

注意下:请在打ABS,符合,碳纤维等性能填充材料完成后需要保温环境时,关闭净化器,等打完再开启抽风过滤。

以下是需要购买的配件:(Note the following: please turn off the purifier when you need to keep the environment warm after you finish hitting the performance filler materials such as ABS, conformity, carbon fiber, etc., and wait until you finish hitting it before you turn on the extraction and filtration.

The following are the accessories that need to be purchased:)

名称

规格

购买链接参考

小米空气净化器通用滤芯(Xiaomi Air Purifier Universal Filter)绿色(抗菌除甲醛加强型-手动识别)(Green (Antimicrobial Deodorization Plus - Manual Identification))https://item.taobao.com/item.htm?spm=a1z09.2.0.0.264e2e8dmix2ag&id=629756209399&_u=735lbc81a43
排气扇(exhaust fan))4寸A100进风款(带开关)(4" A100 inlet model (with switch))https://item.taobao.com/item.htm?spm=a1z09.2.0.0.264e2e8dmix2ag&id=676892415106&_u=735lbc82f6e

软管

(供参考连接是金属丝,很难裁剪,建议买其他)(Hose

(for reference connections are wire, difficult to cut, recommend buying others))

内径≥100mm(Inner diameter ≥100mm)https://item.taobao.com/item.htm?spm=a1z09.2.0.0.264e2e8dmix2ag&id=706415116098&_u=735lbc8322d

 


License

Comment & Rating (88)

Please fill in your opinion
0/5000

非常好的设计,使用前仓温维持在42℃左右,使用后仓温能保持在36℃(室内温度25℃),消除PLA和PETG堵头风险,因为我需要做成紧凑型结构,重新做了一个风管,效果非常棒,谢谢作者的模型,帮助很大。
5
Reply
能否分享你设计的这个风管么?谢谢先!
0
Reply
So I don't get it is there a secondary fan somewhere pulling air out? I don't think the chamber fan alone would be powerful enough to push air that distance and through a HEPA filter. 🤔 Also is the air purifier chamber sealed?
2
Reply
Replying to @myth.ethical.0c :
i agree
0
Reply
please add some generic links to that air purifier and a little english description
The designer has replied
4
Reply
Replying to @itachai :
Thank you!
1
Reply
Sorry, the first one was "the wrong one". So I was going to edit my comment but deleted it . The creator seems to use the "Xiaomi Anti-Formaldehyde Filter for Mi Air Purifier 2". If I understand correctly, this should filter a little more than the "Xiaomi Hepa Filter" ("Old"). As I understand it, this system uses the filter from the Xiaomi Air Purifier 2, so any filters that fit this Air Purifier should also work. "DE": https://www.amazon.de/Xiaomi-SCG4026GL-Formaldehyde-Filter-Grün/dp/B08B15DQNL/ Thus, these could also fit: - https://www.amazon.de/Wessper-Anti-Formaldehyde-Kompatibel-Purifier-Luftreiniger/dp/B08K394PLD - https://www.amazon.de/SHAPOKY-Luftreiniger-Aktivkohlefilter-Luftfilter-Formaldehyd/dp/B0BM9R9VDY ("Old") Filter (EU): https://amzn.eu/d/0SW0rdr The other components are: 1. suitable "hose" (100mm diameter) 2. exhaust fan How well these and the whole project filter, I can not yet say. For that, I first have to build it myself.
(Edited)
5
Reply
Replying to @itachai :
So would you need to purchase a Mi Air Purifier 2 and take out all the internals and move them into the 3D printed enclosure for this to work? Seems like this requires an additional fan powerful enough to suck air from the printer chamber and our through the filter. There's no way the printer chamber fan would be able to do this alone.
1
Reply
can we get English translation please.
The designer has replied
7
Reply
我使用这个浏览器默认是英文的,我用了google翻译。(I use this browser defaults to English and I use google translate.)
1
Reply
Replying to @user_68898811 :
建议你把图片里面的文字都写简介里,这样别人好复制过去翻译
1
Reply
Replying to @pchmhp :
感谢提醒,我改下
0
Reply
完成了,風力好像有點小! 謝謝版主分享!
The designer has replied
1
Reply
可以继续开启机箱外排风扇提升,不过风力和噪音需要平衡自己的需求选择,还有一个方案是选用视频里调速的风扇,噪音也会大,抽风更快。
0
Reply
謝謝分享!
0
Reply
We need a page translation option.
The designer has replied
5
Reply
Updated deepl translation
0
Reply
那个螺丝看着眼熟,有没有种可能是拆固定板时的螺丝?
The designer has replied
0
Reply
来自拓竹赠送的配件包内的,具体哪个包忘记了,囧
0
Reply
两个螺丝应该是铲刀上的
0
Reply
请问固定在机器上的螺丝是什么型号的?
The designer has replied
0
Reply
抱歉现在才看到,Sorry for not seeing it until now.
0
Reply
Replying to @user_68898811 :
感谢!
0
Reply
How do I print the container? There are only 2 STL available, is it possible to get all parts individually as STL????
The designer has replied
0
Reply
目前上传的切片文件里包含了所有的打印部件,并且均设置好了参数,可以一键打印,只不过因为有好几个盘,需要先后选择打印。The current uploaded slice file contains all the printable parts and is all set up and parameterized for one-click printing, except that since there are several disks, they need to be selected successively for printing.
0
Reply
Thanks for the info, I managed it thanks to your video and it worked.
0
Reply
https://makerworld.com/zh/models/58237 根据作者100mm管道建模的三通,需要的可以自己取
1
Reply
需要多台打印一起通风的可以试试
0
Reply
链接打印机的转接口要支撑嘛
The designer has replied
0
Reply
支撑已经在切片中设置好了
1
Reply
Replying to @user_68898811 :
感谢大哥
0
Reply