Printednest Bird Feeder 4.5 by Printednest

Printednest

Household>Pets

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

100% scale 0.2mm layer, 2 walls, 15% infill

Designer

8.6 h

1 plate

4.6(135)

0.2mm layer, 2 walls, 15% infill

9.8 h

1 plate

4.8(9)

Open in Bambu Studio

Boost

1394

2546

339

114

2.6 k

1.4 k

Released

Description

All about this projects: Birdfeeder 4.0 and Birdfeeder 4.5

Video assembly instructions:

!!! Information for the fine print: This model does not need supports. Use our 3mf file. We put a large brim for better adhesion of the print. If you are using stl file, add at least a 40mm brim in your print setup. At the same time, it does not speed up printing to a higher speed than is set. make sure the PEI sheet is properly cleaned and for better adhesion use a spray or whatever you are using !!!

Update 28/1 - This model should not be a problem to print without support. Anyway, since we see that some of you have a problem printing this model, we are adding ready-made 3mf profiles with added supports. They are tree-like and set on critical spots.

More info about on our Youtube Channel
facebook: https://www.facebook.com/printednest

Printednest Makers | 3d Print Group: https://www.facebook.com/groups/printednest

twitter: https://twitter.com/printednest

instagram: https://www.instagram.com/printednest/

Comment & Rating (339)

@kalpik

Print Profile

100% scale 0.2mm layer, 2 walls, 15% infill

Support Issue:This model definitely needs supports. Overhangs were very bad, and it got knocked out of the bed even with a brim. Got this, and a lot of spaghetti. I tried 3 times printing this with PLA and PETG. I give up now.

The designer has replied

@Printednest

Hi Kalpik, did you use our 3mf file? We were included large brim for better adhesion. Do you have clean pei sheet? And as you see here in comments, this model doesn't really need supports :-)

(Edited)

@kalpik

Replying to @Printednest :

Yes, I did use the 3mf file. The brim was as big as the one in your photo, but still it got knocked out. The build plate is completely clean also. I don't have any issues with any other prints.

@Printednest

Replying to @kalpik :

Hi again, it can be problem related to your printer. As you can see in statistics. it was printed 200+ times. From 400 downloads. We know about big overhangs. as in your photos bottom part is not nice, but we were counting with this. Its bottom and this is just functional design, thats why angle is on the edge of printing. Problem can be caused by warping and your noozle is hitting print constantly and then it will peaal of the plate. Try from otheer PLA, or cool it changee temperature.

@HaDeeR

Print Profile

100% scale 0.2mm layer, 2 walls, 15% infill

Nice design. Did't beleive it would work because of the first layers but it finished nice without support.

The designer has replied

@Printednest

Hi, thx for report, so is there any problem with profile? Why 4 stars?

@HaDeeR

Without support almost impossible to print. It works without but the finish is not 100%...

@Printednest

Thx for sharing your pics, I always love this alien design come out of the printer early morning... Where is Ripley...

@yesferro

easy print, looks great

The designer has replied

@Printednest

Thank you yesferro! In white it looks nice! :-)

@Printednest

Easy print :), dont flex here :)))))). As you can see some of the people have problems to make it reality ;), but we love the feeling when you can on the morning and entire egg is there, thx enjoy

@yesferro

Replying to @Printednest :

not a flex, I just grabbed the profile and hit a few buttons. The design is great, making it easy

@danadelic

Print Profile

100% scale 0.2mm layer, 2 walls, 15% infill

Nice model! Just the overhangs are a bit tricky and are turning out not so nice. Still love it!

The designer has replied

@Printednest

wow, what is the location?

@danadelic

Replying to @Printednest :

thats a small town in Germany :)

@YahooJAPAN

Boosted

The print profile is no longer public

I printed 2 of them, one in PLA without supports, the other in ASA with supports. Everything worked on the first print. Thank you

The designer has replied

@Printednest

twins?

@YahooJAPAN

Boosted

Replying to @Printednest :

yes:D

@RuvimKUB

Boosted

Print Profile

100% scale 0.2mm layer, 2 walls, 15% infill

It's very beautiful! Thanks!

The designer has replied

@Printednest

Epic!

@Printednest

cool, thx for prrinting and sharing

@user_1206251217

Printed twice. First time it printed flawless and it’s beautiful. The second print spaghetti at 84% what a letdown :( Love the model though and I will try again.

The designer has replied

@user_1206251217

tried again. spaghetti at 87%

@Printednest

ups. Wheen this happend to me, I have sliced model in bug layerr and prrinted the rest. Then with 3d pen cennected together. Also great DIY designs :)

@edgarwong

Print Profile

100% scale 0.2mm layer, 2 walls, 15% infill

scaled it to 75% came out great looks good Prince nicely

The designer has replied

@Printednest

NICE! This is the smallest one ever made :-)

@Alexis_

hello, it would be interesting to have a roof that could fit on it

The designer has replied

@Printednest

Hi, this is not a birdhouse, just a feeder. Eat and fly away. We also discussed it with local ornithologists :-D

@aroid

Same, I’d love that. I’d have to put it in a spot where it would be exposed to rain a lot getting the seeds and stuff quite wet.

@natefanaro

Boosted

Printed a few with supports and it turned out great! I found that setting the printer to 50% gives the best results. Printed on an X1C. Pics are of white and another in Bambu glow in the dark. It is very bright! I shared my timelapse and final results here https://www.youtube.com/watch?v=ohJZlK3q--c

(Edited)

The designer has replied

@Printednest

aliens! :)))))))))

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Comment & Rating (339)

License

Related Models

Bird Feeder

Dutch-style Windmill Bird feeder from Szwarszowice

Bird feeder - Fat ball holder

Bird Feeder