Articulated Trilobite


Print Profile(9)

Quality Focused  (0.2mm layer, 3 walls, 15% infill)
Quality Focused (0.2mm layer, 3 walls, 15% infill)
X1 Carbon, P1S, P1P, X1, X1E, A11.1 h
4.9
Smooth (0.16mm layer, 2 walls, 15% infill)
Smooth (0.16mm layer, 2 walls, 15% infill)
X1 Carbon, P1S, P1P, X1, X1E, A11.7 h
5.0
Big 150% (0.16mm layer, 2 walls, 15% infill)
Big 150% (0.16mm layer, 2 walls, 15% infill)
X1 Carbon, P1S, P1P, X1, X1E, A12.5 h
4.9
A1 mini, Quality, 0.2mm layer, 3 walls, 15% infill
A1 mini, Quality, 0.2mm layer, 3 walls, 15% infill
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A11.3 h
5.0
Click to see more

670
1122
261
2.6 k
2.2 k
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Description

Dimensions (LxWxH)

110 x 64,32 x 20,18 mm (100% scale)

Basic information

Trilobites have been extinct for quite a while now, so you most likely won't get the chance to hold one in your hand any time soon. Until someone brings them back to life, here's a good alternative!

Files information

I've included 1 file in the .stl format.

 

Material

PLA

Layer height

0,2 mm

Infill

>15%

Support

The model was designed not to require any support material.

Scaling

A well tuned setup should be able to print the model reliably at up to 50% scale, I wouldn't recommend going below that. If you're printing a downscaled version, you need to make sure, that the first layer adhesion is sufficient, as the contact area isn't exactly big, and it might cause issues.

Orientation

Default, laid flat on the belly

Adhesion aid

If your printer suffers from poor buildplate adhesion, consider using some kind of adhesion booster, such as adhesive spray or glue. The contact area is fairly small, and the print might detach otherwise.

In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.

If you run into any issues with the model, please visit the section of known issues, which can be found just below Updates and fixes. If you won't find your specific problem there, don't hesitate to contact me via dm.

There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.

My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.


Comment & Rating (261)

Please fill in your opinion
0/5000

Print Profile
A1 mini, Quality, 0.2mm layer, 3 walls, 15% infill
Super fun! Enjoy articulating things!
1
Reply
Print Profile
Quality Focused (0.2mm layer, 3 walls, 15% infill)
So cool! Printed in Flashforge Rose Quartz, which has shimmer and some translucency.
0
Reply
Print Profile
MULTICOLOR, adaptiv layer 0.2mm layer, 3 walls, 15% infill
great model. lots of fun! thanks for sharing.
0
Reply
Print Profile
Light fuzzy surface, 90% scale - 0.16mm layer, 2 walls, 15% infill
very nice! thanks for sharing.
0
Reply
Print Profile
A1 mini, Quality, 0.2mm layer, 3 walls, 15% infill
Glow in the Dark PLA
0
Reply
Print Profile
Quality Focused (0.2mm layer, 3 walls, 15% infill)
Prints great!
0
Reply
Print Profile
Quality Focused (0.2mm layer, 3 walls, 15% infill)
Fantastic print, the cutest little guy, I might need to make one in every color I have.
0
Reply
Print Profile
Quality Focused (0.2mm layer, 3 walls, 15% infill)
great
0
Reply
Print Profile
A1 mini, Quality, 0.2mm layer, 3 walls, 15% infill
looks good
0
Reply
Very nice. Printed at 0.16 layer height, Atomic Bronze PLA
0
Reply

Remixes (0)

There are no remixes yet