Puch Lightbox LED Lamp by InCrea Lab

InCrea Lab

Art>Other Art Models

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

7.6 h

3 plates

4.8(12)

0.2mm layer, 2 walls, 15% infill

2 h

3 plates

4.5(2)

med huller til væg op hæng

2.9 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Puch logo 3 colors

Tips

I recommend using a textured PEI sheet and the print profile I provided since it has settings with which I've been able to get the best results, if you do not want to use it these are the general bambu studio settings:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color

Comment & Rating (23)

@marcel.scalise

Print Profile

0.2mm layer, 2 walls, 15% infill

Danke

@InCreaLab

Thanks for the amazing feedback! 🙏 If you like my projects you can click on the boost button to help me continue to create with maximum effort! 😃

@mattjensen1993

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice!

(Edited)

@MakerTom

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues

@InCreaLab

What issue did you have? How can I solve It?

@MakerTom

Replying to @InCreaLab :

The printing ran without any problems, but when I removed it from the buildplate, the green part remained there

@InCreaLab

Replying to @MakerTom :

Well, it seems more like a printing problem than a model problem. Does it really deserve a low rating? In any case I try to study some changes to also prevent printing errors. Thanks

@user_1512135125

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice logo

@InCreaLab

Thanks for feedback! 🙏 If you like my projects you can click on the boost button to help me continue to create with maximum effort! 😃

@christofferbond

Print Profile

0.2mm layer, 2 walls, 15% infill

super cool

@InCreaLab

Thanks for the amazing feedback! 🙏 If you like my projects you can click on the boost button to help me continue to create with maximum effort! 😃

@user_1103078202

Print Profile

0.2mm layer, 2 walls, 15% infill

@InCreaLab

Thanks for the amazing feedback! 🙏 If you like my projects you can click on the boost button to help me continue to create with maximum effort! 😃

@Mapsy

Print Profile

0.2mm layer, 2 walls, 15% infill

@InCreaLab

Thanks for the amazing feedback! 🙏 If you like my projects you can click on the boost button to help me continue to create with maximum effort! 😃

@user_1311021572

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_2392656522

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_1404978272

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License