hueforge model of the famous kaido, emperor of the sea of one piece. Print profile for ams, without ams set the pauses as in description

Project: kaido.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA Sunlu Black Transmission Distance: 0.3
    PLA Sunlu Purple Transmission Distance: 6
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Purple
    At layer #16 (1.36mm) swap to Orange
    At layer #19 (1.6mm) swap to Beige for the rest.