Print in Place 2 Layer Hinged Storage Box
IP Report
Print in Place 2 Layer Hinged Storage Box
Boost
41
69
2
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
5.7 h
2 plates
Open in Bambu Studio
Boost
41
69
2
3
77
22
Released
Description
This model is 100% print in place. It's a 2 layer hinged storage box, meaning there is a removable insert, to access the bottom section of the storage box. The box has print in place hinges, and uses a detent design to keep the box closed.
I've printed this design in PLA with great success. The hinge tolerances are pretty tight, to please make sure your printer is setup properly, and your filament is dry.
In the photos you can see my logo printed in white on the top of the box, this design DOES NOT INCLUDE MY LOGO.
Box Dimensions:
Outside: 180mm x 100mm x 40mm
Inside Main Body: 172mm x 92mm
Insert: 91.6mm x 171.6mm
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
Comment & Rating (2)