----------------------------

My designs for free download on Makerworld are intended for PERSONAL printing use only. If you wish to sell prints of my designs, please obtain a commercial license to compensate me for my time and skills in creating these files. A commercial license to sell my Makerworld AND exclusive designs on Patreon can be found at https://www.patreon.com/busykikibee

----------------------------

Find more of my Pokemon prints here: https://makerworld.com/@BusyKikiBee/collections/3605274-pokemon

You can also find exclusive Pokemon prints (Dragonite, Bulbasaur, Pikachu, Gengar and more) on my Patreon →here←

Project: Greninja Pokemon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

This print uses 7 unique filaments
PLA BambuLab Basic Indigo Purple
PLA BambuLab Basic Blue 
PLA BambuLab Basic Turquoise Blue
PLA BambuLab Basic Magenta Pink
PLA BambuLab Matte Desert Tan
PLA BambuLab Basic Yellow 
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Indigo Purple
At 0.72mm swap to Blue
At 0.88mm swap to Turquoise Blue
At 1.04mm swap to Magenta Pink
At 1.44mm swap to Desert Tan
At 1.52mm swap to Yellow
At 1.84mm swap to Ivory White for the rest.
 

All photos you see are of the actual print of my hueforge design. If you use the same filament and colors, you can expect the same result as you see in the photos. The 3mf file is AMS ready to slice and print with the height range modifier and layers prepared for you. If you are using the STL to slice and print the file, be sure to apply color swaps by their mm height and use the height modifications and infill instructions as per the directions provided. During slicing, you might get an error message about floating regions, which you can safely ignore. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing! 

Pictured frame, stand, or puzzle box are by Canadian Gamer and can be found in his Frames and Functional items here: https://makerworld.com/@CanadianGamer/collections/1027330