Creeping Depths 

A mysterious image depicting a colossal centipede emerging from an old, decaying frame, winding its way through dense vegetation and interwoven roots. The composition feels like a window into a hidden subterranean world—dark, captivating, and teeming with life.

Whether as an eye-catcher or part of a collection of unusual nature motifs, this artwork is sure to attract attention!

📏 Size: 235 x 173 x 2.32 mm
⏳ Print time: approx. 8 hours
🖤 Materials:

• Bambu PLA Black
• Bambu PLA White
• eSun Bone White
  🖨️ Printed on Bambu Lab P1P with 0.4 Nozzle

💡 Note:
Those with a smaller or larger print bed can scale the model in width and length—but be sure to leave the height unchanged to ensure the color layers align correctly!
⚠️ Also, the proportions should be maintained to avoid distortions.
Example: Instead of scaling only to 200 x 173 mm, use e.g. 200 x 147 mm to maintain the aspect ratio.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 235x173.37mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA+ Esun Bone White Transmission Distance: 5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Bone White
    At layer #18 (1.52mm) swap to Jade White for the rest.

Have fun with the image.