Story: With the arrival of Spring, the annual cherry blossom season is upon us. My wife loves them and has been wanting to go see them. While a visit to observe them is in the future, this will just have to suffice for now. 

Finishing up the collection with several more traditional colors of black, gray and pinks. Some are water color types.

Cherry Blossoms Bookmark Set 2
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm consisting of 3 47x150mm bookmarks printed on 1 plate.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Dark Gray Transmission Distance: 1.5
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At height depth (0.8mm) swap to Dark Gray
    At height depth (0.88mm) swap to Jade White
    At height depth (1.28mm) swap to Black
    At height depth (1.36mm) swap to Red
    At height depth (1.68mm) swap to Jade White for the rest.

More prints: Clocks…Puzzles…Bookmarks…Portraits…Frames…Stands…are sorted and can be found in my collections https://makerworld.com/en/@3djd/collections

Universal, Customizable Display Frame, Borders, and Stand are available for your prints - Portraits or Bookmarks.

• Wall Mount Frame https://makerworld.com/en/models/1129686#profileId-1129723
•  
• 

• Frame Borders https://makerworld.com/en/models/1129686#profileId-1129723

   

   

• 
• Stand https://makerworld.com/en/models/1129786#profileId-1129827
•  

• 

   

To become an Authorized Seller,  you can obtain a Commercial License from my MakerWorld or my Patreon page https://www.patreon.com/3djdprints.