River Guardian

An image capturing the majestic tranquility of a hippopotamus. With watchful eyes, it rests on the riverbank as its family gently glides through the water. The detailed framing with vines and natural structures enhances the depth of the subject, lending the image a remarkable vibrancy—as if the river guardian were stepping directly from its world into ours.

Hippopotamuses are gentle giants, yet undisputed rulers of their waters. This design symbolizes serenity and power—a true eye-catcher for all who appreciate intricate 3D art!

📏 Size: 230 x 214 x 2.32 mm
⏳ Print Time: approx. 10 hrs 45 min.
🎨 Materials Used:

• Bambu PLA Black
• Bambu PLA White
• eSun Bone White

Printed with a 0.4 nozzle

🔧 Note: If your print bed is smaller or larger, you can proportionally adjust the model's length and width. However, the height must not be altered, otherwise the color layers will no longer align perfectly.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 230x214.09mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA+ Esun Bone White Transmission Distance: 5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Bone White
    At layer #18 (1.52mm) swap to Jade White for the rest.

I hope you enjoy the image