A desiccant dryer that snaps into a Bambu Reusable Spool

• Holds more than ½ Quart/ 1 pound/ 450 grams of desiccant, or can be packed with silica packets
• Print your favorite spool insert to add a little more desiccant or hydrometer
• Divided space to allow more drying surface area of the desiccant
• Easily pour from your desiccant holders straight to the dryer
• Securely fits in a Bambu Reusable Spool
• Slot cut out to fit properly
• Arrow indicators (mark over them) to easily indicate the lid orientation 

In the pictures:

• I use 450 grams of desiccant in my system, that's what's in the dryer
• I store my desiccant in a cereal box, so when it's done drying, I just pop it open inside the box

Printing/ Using

• I recommend PETG so it can be dried up to 70 C - I have used PLA drying systems in the past, and it just never dried the desiccant well
• Make sure the slot from the dryer and the spool are lined up when assembling
• It's easy to tell where the lid is when opening, but arrows are also printed on the shell
  • I used an acrylic marker to color them in and see them better
  • DO NOT open it upside down - the lid does NOT secure to the lid - it is a very loose slot fit
• I have a Sunlu S2 dryer that does not rotate on its own, so I occasionally open it and spin the spool to change up the surface area and allow moisture to quickly dissipate 
• I have a hydrometer spool insert so I can have a second temp/moisture reading inside the dryer