Panda Knomi Screen Mount P Series by Ocular DynamicMakerWorld: Download Free 3D Models

Ocular Dynamic

3D Printer>3D Printer Parts

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

3.1 h

2 plates

5.0(3)

Open in Bambu Studio

Boost

Released

Description

After making my Panda Knomi screen mount for my xTouch screen on my P1S I figured I'd make this version for people not running an xTouch that just wanted a quick minimalistic way to mount they're Panda Knomi. All you need to do is pop the Knomi in and slide the bracket over the screen. Hardest part will just be figuring out how you want to run your power cable.

Plate 1: Lower Offset (Clears if using the 24v 2pin A Series Power Cable, but may not clear the USB C for power)

Plate 2: Higher Offset (Should clear for use with USB C Cable, can add a right angle adapter for better clearance if need be)

Plates are Print by Object. I've included both bezels, heptagon shaped one and circular one with Bambu Lab text around it (although the text will require an AMS).

If there is interest I can upload a blank round bezel so you can put your own labeling on it, just let me know.

Boost Me (for free)

Found this helpful, throw a boost my way. Thank you!

Comment & Rating (9)

@johnfcooley

Print Profile

0.2mm layer, 2 walls, 15% infill

Gonna give it 5 stars, it printed well and looks good. I found the usb c cable to push the mount outwards. The Molex that comes with the mount fits nicely. Thanks for the file and let me know if it's something I did wrong. I lost my branch so have to use usb.

The profile uploader has replied

@OcularDynamic

actually I used an L adapter I have that works perfect. My USB C cable end just cleared but this clears a little better. Understandable some might not with bigger ends. You could prob increase the Z height to add a little thickness to it to space it out if you only need a little. I could bump the mounting spot up a little if you need me too tho. Just let me know

(Edited)

@OcularDynamic

Hey bud, i just realized I didnt put the other version in the profile. I added the second plate with the mount offset up (like in my photo in my above comment). I see how the down offset wont clear the USB cable. I was using the 2 pin cable for power from my A1 originally.

@johnfcooley

Replying to @OcularDynamic :

Cool, I'll check it out. Either way the 5 star stands, you deserve it. Figured you were using the 2 pin. I misplaced the Branch, no idea where I put it, may have tossed it. Going to use the 2 pin (maybe) for a mod I'm thinking about. Thanks for updating

@user_675001295

Boosted

nice thanks boosted !

The designer has replied

@OcularDynamic

appreciate it!

@user_675001295

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

nice work thanks !

@MysterySoldier

where can i find the stl to the honeycomb on your door

@carbonvater007

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.