A 10-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway.

This model comes in 4 variants:

• With front cutout for power cable routing
  • With holes for M3 thread inserts. → UCG-Fiber 10i RM for Thread Inserts.stl
  • With holes for attaching the screw directly into the plastic. → UCG-Fiber 10i RM.stl
• Without the front cutout
  • With holes for M3 thread inserts. → UCG-Fiber 10i RM NC for Thread Inserts.stl
  • With holes for attaching the screw directly into the plastic. → UCG-Fiber 10i RM NC.stl

You can use the same back plate regardless of the chosen variant.

Credit for the printed model picture: @TechnoTim

This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here.

Do you like my models? Consider buying me a coffee ;)

Updates:

• 26 Mar. 2025: I've released version 1.0 of this model, based on feedback from the community. Thank you! What changed:
  • The UCG-Fiber now goes 1mm further into the mount, making it more flush with the front.
  • Reduced the size of the side holes.
  • Increased the internal spacing by 0.1mm on all sides.
  • Added vent holes to the back plate.
  • Added variants without the front cutout.
  • Made the walls 0.5mm thinner on the sides, to make it easier to install the mount in the rack.
  • Added orientation arrows in the back plate and mount to indicate which side of the mount should be up.

Parts

• 4x M3x10 or 4x M3x12 for the back cover.
• Optional: 4x M3 thread inserts. Use those if you don't want to screw the back, you can print the Main Body for thread insert instead of the regular one and apply the thread inserts, such as this one from CNC Kitchen.

Print Settings

Rafts:

Doesn't Matter.

Supports:

No.

Resolution:

0.2 or 0.24

Walls/Perimeters:

3 or more

Infill:

20% or more

Filament:

PLA+/PETG/ABS/ASA/Nylon