Formula 1 Tag Heuer Wall Clock by BC Designs

BC Designs

Household>Decor

IP Report

Print Profile(2)

All

X1 Carbon

H2D

P1S

X1E

P1P

5 colours - 0.16mm layer, 2 walls, 15% infill

Designer

5.4 h

2 plates

4 colours - 0.16mm layer, 2 walls, 15% infill

Designer

5.3 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Wall clock inspired by the newly released Tag Heuer Formula 1 clock.

Requires 2 AMS to print as per the picture, or use the edited 4 colour profile to print with 1 AMS. I've seen promo pictures with both blue and white number rings so either should be authentic.

Print both build plates and simply assemble using the locator pegs to line up the outer dial. Optionally add a dab of glue:

Fits all standard wall clock movements, the one I used had a 16mm shaft, came in a 2 pack from Amazon:

https://www.amazon.co.uk/dp/B0CMX92V46?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0&th=1

No supports required. Print profile included is 0.16, take the time to print at 0.16 for improved quality :)

Boost Me (for free)

Like share and boost if you enjoy :)

Comment & Rating (8)

@Beerman

I upscaled it by 10% in fusion (making sure all the holes and the spot for the clock were all the same size) as it looked a bit small on the build plate. I also added a second hand. Picture taken before I got my clock but it works well.

The designer has replied

@BCDesigns

Nice looking print, maybe I mismeasured but was sure it was close to full size build plate!! Second hand looks really nice, I've made 4 or 5 clocks now and its probably a personal preference to leave it off, often snags and falls out of position from experience.

@Beerman

Replying to @BCDesigns :

I noticed the profile was for an X1C which has that over the top purge line. The A1 purge isn't in the build area so I gained a bit of space there. I used some double sided tape to keep the second hand on the pin and have bent it slightly upwards so it won't catch. You can notice the tape up close but not from where the clock is positioned.

@macieksa

Howdy @Beerman how did you manage that upscaling I'd like to resize another clock to 340mm diameter and want to keep the holes the same size like you say you did?

@BigBing

Boosted

Print Profile

4 colours - 0.16mm layer, 2 walls, 15% infill

looks great and printed perfect

@wakulandia

Is it compatible with the bambulab clock kit?

The designer has replied

@BCDesigns

Should be, what size is it on your calipers? These amazon ones are approx 56mm square.

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.