Dart Diorama/Zimmer by krappe

krappe

Art>Other Art Models

IP Report

Print Profile(1)

All

0.16mm layer, 2 walls, 15% infill

Designer

15.5 h

7 plates

4.8(5)

Open in Bambu Studio

Boost

Released

Description

Content has been automatically translated.

Show original

Dart Room for Playmobil Dart Players

I have been tinkering and experimenting for a long time, and this is the result.

I have partly created the plates with per-layer printing, but of course everything can also be printed individually.

I hope you enjoy the diorama.

The whole thing fits with Playmobil 71165

Thanks also to

@m.rittweger for the superb dartboard

https://makerworld.com/de/models/1018511-steel-dartboard#profileId-999326

@Patrick501 for the scoring system

Comment & Rating (27)

@Daumenkrieger

Boosted

Played around with it a bit. Really awesome! Thanks again for the brilliant design

(Edited)

The designer has replied

Show original

@krappe

Looks amazing 💪🏻

Show original

@Daumenkrieger

Boosted

Replying to @krappe :

Regarding the template The one for a friend is also awaiting the remaining parts

Show original

@krappe

Replying to @Daumenkrieger :

Top, what's the hole for?

Show original

@3DDruckNI

Boosted

Hi, thanks for the great diorama, I'm currently printing it and will finish it this evening Best regards! By the way, also shared on TikTok under 3ddrucknienburg ✌🏼

(Edited)

The designer has replied

Show original

@krappe

Certainly, I'm eager to see the result Please send a picture, thank you

Show original

@krappe

Top notch, thank you for the image

Show original

@3DDruckNI

Boosted

Replying to @krappe :

Thank you, brilliant work, it was truly fun! 😉

Show original

@user_483351780

The print plate 3 with the dartboard needs to be corrected. The file seems to have an error: If you take a closer look at the layers in the slicer, you can see that it prints some random stuff up to layer 11 and then arranges the colors only in the last layer. This inevitably leads to unsightly color gradients. I have now taken the dartboard from Makerworld (ID# 903516), trimmed it, and am printing with this file. It has no errors and looks significantly better in the final result.

The designer has replied

@krappe

Okay, I haven't encountered any issues so far, but I do use a cleaning volume of 1.1 for prints like these Regards

Show original

@user_483351780

Replying to @krappe :

It has nothing to do with the cleaning volume. At first, I thought it was related, too. I usually print with a multiplier of 0.8 (which is perfectly sufficient), and I printed the dartboard multiple times, even with 1.2. It didn't help at all. Then, I took another look at the individual layers in the slicer and noticed that until layer 11, only nonsense is printed in terms of colors, and everything gets corrected starting from layer 12. However, that one layer is not enough to cover up the 'nonsense' from the previous 11 layers. The error is also visible in your picture, just not as extreme as in mine. Take a look at your triple 12; you can see a slight black corner there. In the pictures from Daumenkrieger in the comments, it's also visible – check out the spider around the bull area and at the 5 and 20 – it’s very noticeable.

@Crusader32

Replying to @krappe :

Englisch I had the same problem and changed the file

@Ruucki

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Very beautiful design top

Show original

@Crusader32

Print Profile

0.16mm layer, 2 walls, 15% infill

Everything worked perfectly except for the large dartboard With the dartboard I had to adjust the color change, as it had not worked correctly

Show original

@Daumenkrieger

Boosted

1a Design Spotted this in a Facebook group Print in progress Unfortunately the diorama detached at the front (without the short wall) Time for another attempt

(Edited)

The designer has replied

Show original

@krappe

As it's relatively lengthy, ensure the print bed is clean, I'm currently printing the 10th room, no problems so far

Show original

@Daumenkrieger

Boosted

Replying to @krappe :

I've just noticed the build plate lifting at the edges I've now rotated it 45 degrees and will see what happens If the same thing happens I'll use the original Bambu build plate My first attempt was with a new third-party plate It's definitely not your file Top job!

(Edited)

Show original

@krappe

Replying to @Daumenkrieger :

Are you using the 0° plate, the blue and yellow one? It tends to detach; the coating reduces the magnetic holding force, so you should only print small items on it

(Edited)

Show original