Easter Bunny Welcome Sign by Kojak.nrMakerWorld: Download Free 3D Models

Kojak.nr

Household>Decor

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

0.2mm layer, 2 walls, 15% infill

Designer

5.4 h

5 plates

4.7(19)

Open in Bambu Studio

Boost

110

203

140

Released

Description

Content has been automatically translated.

Show original

Easter Bunny Welcome Sign

This cheerful bunny brings festive cheer to your home with this charming Easter bunny welcome sign! The cute bunny holds a large board with the word “welcome” written in cheerful letters. With its floppy ears and friendly gaze, it looks directly at us, while its hind legs peek out from under the board, giving it a playful character. The sign is made of four printing plates and designed in a harmonious color palette of brown, white, black, and orange. These vibrant colors give the bunny an inviting look, making it a perfect eye-catcher for your door or entrance area.nnOn the back of the sign are two practical eyelets that allow you to easily attach the bunny to a door with a rope or string. This makes it a cheerful greeting for your guests and creates a warm atmosphere during the Easter season. This Easter bunny welcome sign is not only a wonderful decoration but also a loving gift for friends and family who celebrate Easter!

Boost Me (for free)

If you like it, please give me a boost, a comment and many stars :)

Easter bunny decoration

rabbit

welcome

Comment & Rating (36)

@Stoner2215

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

This printed and turned out great. My only criticism is I wish that there were some negative spaces or clips to help line up the components and to not have to glue every different color together. Honestly gluing it wasn’t too bad except for the whiskers and the bottom paws because there is no support so I ended up printing an extra set of top paws as spacers to put underneath them.

The profile uploader has replied

@Kojak.nr

Thank you for the comment and stars 🌟 and yes, there are a few improvements possible for the next project 😀Your bunny 🐰 looks great 👍👍

Show original

@Kojak.nr

Thank you for your support 🙏😀

Show original

@killerkater7

Print Profile

0.2mm layer, 2 walls, 15% infill

Its a cute model, but there are some issues. Some parts only have small areas below them, which made glueing a little bit harder. Some of the round parts, like the hands,came out quite square, due to the low number of polygons. Also the high number of parts, compared with similar models.

The profile uploader has replied

@Kojak.nr

Thank you for the comment, yes, the model has a few tricky spots to glue, but the result looks great 👍😀 I will work on it and optimize future models, thank you

Show original

@h0useb0y172

Print Profile

0.2mm layer, 2 walls, 15% infill

A lovely print thank you:)

The profile uploader has replied

Show original

@Kojak.nr

Thank you for the stars 🌟 😀

Show original

@user_2939739421

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great work 👍

The profile uploader has replied

@Kojak.nr

Looks great 😀👍and many thanks for your support 🌟🙏👍

Show original

@Gugsdu

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Super, gluing it was a bit fiddly but it turned out great, a very nice print

The profile uploader has replied

Show original

@Kojak.nr

That makes me very happy and your rabbit looks great 😀👍Thank you for the stars 🌟 and if you would like to support me further I would be very grateful for a boost Thank you 🙏

Show original

@xfaschiertesx

Print Profile

0.2mm layer, 2 walls, 15% infill

Super Design Incorporate dowels if possible for perfect alignment during gluing

The profile uploader has replied

Show original

@Kojak.nr

Thank you for the feedback I will consider it for future projects and thank you for the stars 🌟 😀

Show original

@HoopFit85

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect for the holidays coming up!

The profile uploader has replied

@Kojak.nr

That pleases me very much that you like it 😀and many thanks for your support 🙏👍

Show original

@user_63283674

A truly delightful print It was a pleasure to print and assemble I would happily do this again Keep up the excellent work

The designer has replied

Show original

@Kojak.nr

I am absolutely delighted you like it, thank you 😀

Show original

@DjMG

Print Profile

0.2mm layer, 2 walls, 15% infill

cute print!

The profile uploader has replied

@Kojak.nr

Thank you 🙏

Show original

@Csnyder750

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

so very cute. do think this could have been made easier to assemble with snap in parts or connectors to get locations correct. I also wouldn't have hated an ams version to print in one piece or a few pieces.

The profile uploader has replied

@Kojak.nr

Thank you I am very pleased that so many people like it and yes there is still room for improvement but I have only had the printer since Christmas and I am still learning Thank you 🙏 for the stars 🌟 and the boost 😀😀😀

Show original