Purge Line Bin for P1 & X1 Poop Lines - 2 Versions by br1acc

br1acc

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

Vertical Bin, PLA, 0.24mm layer, 3 walls, 15% infill

Designer

1.2 h

1 plate

4.9(16)

Horizontal Bin, PLA, 0.24mm layer, 3 walls, 15% infill

Designer

1.2 h

2 plates

4.8(12)

0.24mm layer, 3 walls, 15% infill

1.5 h

1 plate

Open in Bambu Studio

Boost

170

241

179

Released

Description

Saving your purge lines for a special occasion?

Too lazy to throw them away after every print?

Here are two different styles of a bin that you can mount to the left or right side of your P1 & X1.

A small tab holds the bin in place. Simply fit it between the glass panel and plastic side panel.

For a secure fit, push the glass panel towards the tab to secure the bin in place.

After printing, be sure to remove the brim that was added to improve bed adhesion.

If you are printing the horizonal version:

I recommend printing the “BRIDGING TEST” on the 2nd plate to ensure your printer can properly bridge the top surface with the filament type you've chosen.

Try my Purge Line Removal Tool:

Purge Line Removal Tool - Save Your Fingers

Comment & Rating (33)

@user_3378281537

Print Profile

Vertical Bin, PLA, 0.24mm layer, 3 walls, 15% infill

Perfect :)

Show original

@Nursomancer

this silver looks smooth 👌 which filament is that?

@user_3378281537

Pla Basic Silver ;)

@Flor8

Print Profile

Vertical Bin, PLA, 0.24mm layer, 3 walls, 15% infill

Great thanks

Show original

@PFlabo

If you mold it at a 45 degree angle, you can make it without using support material.

The designer has replied

@br1acc

Neither of the 2 versions require supports - please check the default orientation in the print profiles.

@user_854168577

Print Profile

Horizontal Bin, PLA, 0.24mm layer, 3 walls, 15% infill

At least the purge strings don't remain on the print bed

Show original

@Snowball78

Print Profile

Horizontal Bin, PLA, 0.24mm layer, 3 walls, 15% infill

Perfect fit and printed very easy.

@davids.fpv

Print Profile

Horizontal Bin, PLA, 0.24mm layer, 3 walls, 15% infill

Bridging is totally fine. Good Quality

@user_729867705

Print Profile

Vertical Bin, PLA, 0.24mm layer, 3 walls, 15% infill

love the design and printed flawlessly.

@user_1719074911

Print Profile

Horizontal Bin, PLA, 0.24mm layer, 3 walls, 15% infill

The print was incredibly successful and everything worked perfectly (as you can see) TOP

Show original

@Din_244

Print Profile

Vertical Bin, PLA, 0.24mm layer, 3 walls, 15% infill

@Flo_04

Print Profile

Horizontal Bin, PLA, 0.24mm layer, 3 walls, 15% infill

Perfect for storing the initial filament strip, however, the hook is slightly oversized, causing it to hang slightly askew from the glass plate

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.