Batman Hueforge by Andus VUMakerWorld: Download Free 3D Models

Andus VU

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

0.08mm layer, 2 walls, 100% infill

Designer

4 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

This is an image of Batman made with hueforge.

Here are the instructions for printing:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x195.49mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 1.9mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (1.2mm) swap to Blue
    At layer #19 (1.52mm) swap to Grey
    At layer #20 (1.68mm) swap to Jade White for the rest.

If you like this post, please consider boosting it, thank you:

Boost Me (for free)

batman

HUEFORGE

Comment & Rating (3)

@Hempy

it looks good but mine did not have near the amount of blue that your picture has. I did print from the handy so not sure if that is why.

(Edited)

The designer has replied

@user_3652330719

Hi @Hempy thank you for your comment. I realized I have uploaded the wrong profile. I have updated it now and should print with more blue as the photo. Sorry.