Igris Solo Leveling by CRV.3D

CRV.3D

Art>Sculptures

IP Report

GIF

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

H2D

A1 mini

0.12mm layer, 2 walls, 10% infill

Designer

45.9 h

5 plates

3.3(6)

A1 Mini Profile

Designer

46.9 h

6 plates

Open in Bambu Studio

Boost

172

245

346

Released

Description

Boost Me (for free)

Boosting helps this Yawning Dad some coffee.

A highly detailed, print-ready sculpture inspired by Igris, the legendary shadow knight. Perfect as a collectible or decorative piece for fans of epic fantasy characters and detailed miniatures.

Key Features:

Dynamic pose showcasing the strength and elegance of Igris
Intricate armor and cloak detailing
Striking two-tone design optimized for multi-color printing
Scalable design suitable for tabletop display or larger showcases

Suggested Print Settings:

Layer Height: 0.12mm - 0.2mm (fine details recommended)
Infill: 10-20%
Supports: Yes (Recommended for intricate areas)
Filament: PLA or PETG
Tips: Consider using tree supports for easier removal and smoother finish. Printing in separate color sections (helmet plume, armor, and cape) enhances final visual appeal.

Assembly or Usage Instructions:

All Parts are named accordingly, pay attention what you are printting.
Use CA glue to assemble securely. Painting the model enhances details and makes features stand out vividly.

Additional Notes: This model is intended for personal use and gifting. Redistribution or commercial use is not permitted. Inspired by fantasy genre and fan art.

Comment & Rating (22)

@piperfra04

Boosted

Print Profile

0.12mm layer, 2 walls, 10% infill

Very beautiful, I scaled it down to approximately 13cm in height

Show original

@CRV.3D

that turning out great! glad you like it!

@Afinect

Boosted

Should i change my print profile / settings if i want to scale it down?

@piperfra04

Boosted

Replying to @Afinect :

I resized it to 45%

Show original

@aidenmj

Boosted

I love this model. The cape a little misaligned I’m not sure only me and the model have some inaccuracies. but I like it very much and if you have Beru or other Shadow army in similar styles would be great!

@Steffen4788

Print Profile

0.12mm layer, 2 walls, 10% infill

Assembly of the parts proved somewhat challenging, yet the final result is quite pleasing Thank you for sharing

Show original

@user_302829522

I scaled down to 45% but the cape seems a bit too large. Lining up the files at 100%, the cape still looks oversized and doesn't sit flush against the shoulders without extending past his feet. Has anyone else run into this?

The designer has replied

@CRV.3D

I haven’t. let me double check the file. which profile are you using?

@user_302829522

Replying to @CRV.3D :

The A1 Mini Profile profile but I also downloaded the STL's and tried to line it up with those

@user_302829522

Replying to @CRV.3D :

Seems like no one else has had the problem, maybe I'm going crazy but I just downloaded the 0.12 profile and tried to line up the files

@Afinect

Boosted

Nice looking model which i would like to print :) Is it possible to also post a profile for Bambu Lab A1 mini? Many thanks in advance!

The designer has replied

@CRV.3D

I can do that

@Afinect

Boosted

Replying to @CRV.3D :

TOP! It would be highly appreciated if you could :D

@CRV.3D

okay it’s up.

@Wrayth

Print Profile

0.12mm layer, 2 walls, 10% infill

Other Issues:I wanted to love this model so much. Pieces are on the plate wrong so you don't have a smooth finish. Parts don't fit as they should (had to do a lot of major adjustments). I spent more time trying to make things work than I should absolutely have to. Overall it's a cluster, but can be made to work with ALOT of elbow grease and cursing.

@Kaisertronic

Boosted

I feel the same way… the cape doesn’t fit the body at all, requiring countless adjustments afterward! The eyes are positioned completely wrong on the print bed… Catastrophically aligned! The designer urgently needs to address the body/cape issue! It’s a terrible fit! Don’t print it!

Show original

@xsobri

It would be wonderful to have it in Funko Pop size

The designer has replied

Show original

@CRV.3D

the only issue is the detail will go away, and I have this is as a multiprint so people won’t need an ams.

@wake125122

Print Profile

0.12mm layer, 2 walls, 10% infill

Other Issues:the back part did not line up correctly and I was unable to assemble. I wanted to love it but it is not functional. I made sure everything printed out to spec and it seems to so I am not sure what happened.

@Kaisertronic

Boosted

Print Profile

0.12mm layer, 2 walls, 10% infill

Other Issues:The model is poorly designed Several parts are misaligned on the print bed The cloak does not fit the body Please revise this Until an update is released this is a waste of filament

Show original

@jasonvorxis50

Print Profile

0.12mm layer, 2 walls, 10% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License