Fidget bolt with nuts (M36x4)
IP Report
Fidget bolt with nuts (M36x4)
Boost
46
100
7
Print Profile(4)
Bolt & all 6 nuts 0.12mm layer, 4 walls, 15% infill
Designer
9 h
1 plate
Only bolt 0.12mm layer, 4 walls, 15% infill
Designer
3.4 h
1 plate
6 nuts on 6 plates 0.12mm layer, 4 walls, 15% infill
Designer
6.3 h
6 plates
1 bolt with 1 nut 0.12mm layer, 4 walls, 15% infill
Designer
4.4 h
1 plate
Open in Bambu Studio
Boost
46
100
7
2
35
18
Released
Description
Just a big and nice bolt with a couple of nuts. You can play with them or use them as a cool decoration. The thread I used is an actual M36x4.
I've provided six versions of the nut, each with a different height. You can choose from heights of 5, 10, 15, 20, 25, and 30 mm, or just print them all. 😊
The thread may seem a little tight right after you take the pieces from the printer. It just needs to be screwed and unscrewed a couple of times, and it gets a lot better. Also, here’s a small tip for you: You can apply a couple of drops of grease.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
Comment & Rating (7)