An egg-shaped poke-ball! What?! Yes, ideal for pokemon lovers for the Easter festivities!

This is an upload of my previous egg model to join the easter eggs contest 2025!

The ball has six components:

• The white base
• The white button
• The black ring
• The black button ring
• The red topper

Materials needed

1. Super glue
2. 1x M3 screw (14 or 15mm long)
3. 1x M3 nut

Assembly instructions

1. Snap fit the white button into the black button ring, making sure it fits snugly and level.
2. The black ring has two pins that fit inside the black button ring. Gently bend the ring and fit the pins in the holes.
3. Deposit some glue on and around the three vertical pins that stick out of the white base, and on the button alcove on the white base.
4. Fit the black ring over the white base. The black ring has three holes where the pins should fit perfectly. Use them as a guide.
5. Align the red topper screw holes with the black ring screw holes and use your fingers or an allen key to drive the M3 screw in. Then cover it on the other side using the M3 nut.