A1 Mini Outrigger Feet Remixed by defyant123

Remixed by

defyant123

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 4 walls, 30% infill

Designer

5.7 h

4 plates

4.8(22)

Open in Bambu Studio

Boost

100

236

201

127

Released

Description

Retro outrigger feet Space 1999 Eagle style! Bit of a fidley fit but they get there in the end. Mine are all pla+ but you can use pretty much anything filament as they run in cantilever style using the sides for support. I'm using some old style P1P wobble rubber feet but you can print your own in tpu if you like. Link here…https://makerworld.com/en/models/18809#profileId-17573

You will need to add your own longer m3/m2 screws.

Creds tojohndc for the original make https://makerworld.com/en/models/109008

Enjoy!

a1 mini

a1 mini feet

Comment & Rating (35)

@aguynamedky

Print Profile

0.2mm layer, 4 walls, 30% infill

Thanks for taking the time to design this. I've had the idea of using the anti vibration feet on the mini but never got around to it. The only downside is that the feet not able to move around much to dampen the vibrations. A simple fix would be to extrude the inner face down a bit so the feet don't sit so deep as shown in the picture.

@defyant123

Mine were intentionally designed not to wobble, but to just make use of the feet if you had a spare set. Just print some small washer style shims @ the height you need to sit above the feet inside the hole... it's keyed for that reason :) Thanks for using the design and posting :)

@zerranoman

Replying to @defyant123 :

Awesome model, but I ran into similar issues of the feet not properly absorbing enough vibrations, so I whipped up these 7mm high spacers to give this model a tiny bit of height! They can be found here: https://makerworld.com/en/models/235044#profileId-251359 They will definitely give your feet the little bit of wiggle space they need

@ZachWPrints

Boosted

perfect addition that should have been factory parts. Have a boost.

The designer has replied

@defyant123

tyvm :)

@zerranoman

Print Profile

0.2mm layer, 4 walls, 30% infill

Phenomenal design!! Fits my A1 Mini perfectly, it looks a part of the base build, and it lets me have a use for the extra set of vibration feet that came with my P1S. 10/10

@defyant123

Love the darker colour!

@elitebydesign3d

Boosted

Flawless print, and no issues at all. I flipped the anti-vibration feet from Bambu Labs since i think they made them slightly bigger and didn't fit in one direction. But overall, turned out really good and A1 Mini vibration has reduce so much!!

@rezonjov

Boosted

which M3 screw do i need for this? there are so many options

@nano.muc

Thanks a lot. Solved my issue with the A1 Mini hopping around when printing very fast. Printed the TPU feet for it and stuck them with tape to the ground. No wandering off anymore. I love it.