Gameboy Color TCG Deck Box Fits 60-100 Cards!

Gameboy Color TCG Deck Box Fits 60-100 Cards!

Boost
357
673
45

Print Profile(3)

All
A1
X1E
A1 mini
X1 Carbon
P1S
P1P
H2D
X1

0.16mm layer, 2 walls, 10% infill
0.16mm layer, 2 walls, 10% infill
Designer
18 min
1 plate
5.0(13)

0.16mm layer, 2 walls, 10% infill
0.16mm layer, 2 walls, 10% infill
Designer
2.8 h
1 plate
4.7(6)

Large Deck Box: Fits 100 Double Sleeved Cards
Large Deck Box: Fits 100 Double Sleeved Cards
Designer
4.7 h
1 plate
5.0(4)

Open in Bambu Studio
Boost
357
673
45
39
244
127
Released

Description

Boost Me (for free)

Thank you for your interest in my first model I uploaded!

Inspired by Ashwood's design, I decided to make a deck box from scratch that replicates the original Gameboy Color look. 

 

Fits 60 single or double sleeved Pokemon cards. 

 

Edit: 

3/24/2025- Added Profile for a large version of the deck box with a slide top. Fits up to 100 double sleeved cards. 

 

I decided to give this deck box a flip top, latch design with optional magnetic cutouts for 4x2mm round magnets.

 

You will need to print:

 

1x Gameboy TCG Box Main Body WITH LATCH.stl

1x Gameboy TCG Box Top Plate WITH LATCH.stl

1x Gameboy TCG Box Faceplate NO LOGO.stl

1x Gameboy TCG Box DPAD.stl

2x Gameboy TCG Box AB Buttons.stl

2x Gameboy TCG Box Start Select  Buttons.stl

 

Assembly:

 

Main body with top plate is designed to use your common 1.75 filament for the hinge pin. PLA recommended, anything softer will make it more difficult to install. Take your time fitting the filament through. Use soap or WD-40 if you are having a difficult time.

 

Tip: The latch may not catch perfectly to keep the lid closed, so I recommend using light heat to slightly bend the latch until your lid fits the way you want it to.

 

Faceplate and buttons are glued on, ( I use Super Glue Gel).

 

Support me on Patreon for more exclusive models and commercial rights!

 

 

Comment & Rating (45)

(0/5000)

will there be one that can fit 100 single sleeved cards?
The designer has replied
0
Reply
I can certainly model one to fit a 100 sleeved cards. I will upload it within the next few days.
3
Reply
That would be AWESOME!
1
Reply
Replying to @HoLeeSpirit :
Will you upload it? The 100-card model? I don't see it in your profile
Show original
0
Reply
This came out AMAZING! Your design was incredible, so thanks for taking my request for a 100 card box.
The designer has replied
2
Reply
I really appreciate it! I’m glad everything turned out alright. If you have any other requests or suggestions on what you want to see next, don’t hesitate to ask!
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
Looks amazing and everyone asks where to put the batteries! tastes great too! I licked the cart
The profile uploader has replied
profile
1
Reply
Thank you for posting a photo of it, turned out great!
0
Reply
Beautiful boxes, a colleague will receive them for his cards They printed flawlessly on an X1 Carbon, in both PLA (black & blue) and PETG (red)
Show original
1
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
good work!!
profile
1
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
such a cool way to desplay my cards and also it holds way more then 100 cards it probably holds about 300 cards. way to go!
profile
1
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
I really love the design and it does fit my 60 card double sleeved deck. However I can not get the filament for the hinge to go in to save my life. I'm using eSun PLA+. I've tested all the holes on the deck box, and it slides through all of those easily. the problem is with the hinge on the top cover. For some reason I can't get it to budge through those holes at all. I've tried soap as instructed and still nothing. EDIT: After using the designer's suggestion below, the box works perfectly!
The profile uploader has replied
0
Reply
Honestly, if you could fit a piece of filament on both outside hinges, that should be good enough for the lid to work. Instead of having one long piece going through the whole hinge, do 2 smaller ones on each side. Ive had that problem as well on some of the boxes I printed, but this method works too. Hope this helps!
(Edited)
0
Reply
does the standard model fit a 60 card double sleeves deck?
The designer has replied
0
Reply
yes it does!
0
Reply
nice collection
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 10% infill
thank u
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.