Hueforge Beer&Grill
Hueforge Beer&Grill
Print Profile(1)
Description
Hueforge Beer&Grill
Boost Me (for free)
Boost Me PleAse :p:d
Project: beer&grill.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x179.67mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA Sunlu/Jayo Black Matte Transmission Distance: 0.1
PLA Sunlu + Green Transmission Distance: 3
PLA Bambu Basic Bronze Transmission Distance: 0.6
PLA Sunlu Red Transmission Distance: 3.5
PLA eSun Yellow Transmission Distance: 4.9
PLA Sunlu Matte White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black Matte
At layer #7 (0.64mm) swap to Green
At layer #11 (0.96mm) swap to Bronze
At layer #15 (1.28mm) swap to Red
At layer #20 (1.68mm) swap to Yellow
At layer #24 (2mm) swap to White for the rest.
Please leave a comment and like if you like my Hueforge. Thank you very much.
Non-commercial !!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
Comment & Rating (2)