This is the new smaller version of my fidget track. I've had a number of request to make something a little smaller that fits in the palm of your hand a bit better. If you are interested in something like that, this is for you!

This is great as a single hand fidget that you can endlessly roll in one palm. 

I have brought over my two favorite tread patterns, but there are many other options available. If you like this size, but have a specific pattern from my finger tracks V2 that you like, I'm happy to port it over to this version of the model. Leave a comment or send me a message! 

As with the other versions of my tracks, this is a somewhat difficult print. Its worth the time to make sure your build plate is clean and if you're not sure about your filament run a quick calibration for flow and for pressure advance.

Printing Recommendations

Use my print profile to get the settings that work well for me.

The model is made to work with and 0.4mm nozzle and 0.2mm layer height. If you use a larger layer height some gaps will be fused together by the slicer.

If you are having trouble with your first print try a different filament, and please start with something simple like a plain PLA. Some specialty colors like silks mainly and some mattes lack the strength for this design to work well. Also, I strongly recommend printing In PLA; PETG tends to be hard to print things with small gaps without stringing or blobbing. Not that it's not possible, but you will probably have better luck with PLA, and no reason really to print in something more fancy.