Uno Slide Box by GRATiAN

GRATiAN

Tools>Organizers

IP Report

GIF

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.16mm layer, 6 walls, 15% infill

Designer

2 h

1 plate

4.9(138)

0.2mm layer, 2 walls, 15% infill

1.8 h

1 plate

4.9(12)

Tweaked settings (1h22 print time, 77g)

1.5 h

1 plate

5.0(8)

Multiple Sizes and TPU Sliders on High-Temp Plate

9.6 h

6 plates

5.0(4)

Click to see more

Open in Bambu Studio

Boost

1230

2670

264

221

2.1 k

1.4 k

Released

Description

*3D Printed UNO Box with Slide Lid*
Keep your UNO cards secure and stylish with this custom 3D-printed storage box! Designed for convenience, the smooth-sliding lid ensures quick access while keeping cards neatly contained. Compact and portable, it’s perfect for game nights on the go. Durable, lightweight, and crafted to snugly fit standard decks, it’s a must-have for UNO lovers and a thoughtful gift for card game enthusiasts!

Documentation (3)

Assembly Guide (3)

IMG_8858.jpeg

IMG_8859.jpeg

IMG_8860.jpeg

Comment & Rating (264)

@Griffel

Boosted

⭐⭐⭐⭐⭐A very stylish card box. My Uno cards were too many to fit, however, perfect for a standard deck of cards as well.

The designer has replied

Show original

@GratianDmtr

Hi there! Could you please measure your UNO cards and leave a comment with the exact dimensions (length, width, and thickness) in millimeters or inches? Once I have those details, I’ll get started on preparing the 3D model for you. Thanks!

@Griffel

Boosted

I have two stacks of playing cards, one Uno stack is 7cm and the Skip-Bo stack is 8cm, and I would be very grateful if you could help me with this ☺️Thank you in advance for a fantastic model

Show original

@GratianDmtr

Replying to @Griffel :

I sent the file in a message.

@user_2339982172

Print Profile

0.16mm layer, 6 walls, 15% infill

Adorable

Show original

@GratianDmtr

Thank you!

@navycow

Boosted

Print Profile

Multiple Sizes and TPU Sliders on High-Temp Plate

this came out great. much better than the beat up cardboard boxes they came in. one suggestion is to make the tab on the slider slightly larger so it overhangs the side of the box. it’ll make opening it easier

@RevHazlett

Boosted

Gratain did a great job on the model! I'm glad you like the profile 😀

@GratianDmtr

Replying to @RevHazlett :

Thank you!!

@GratianDmtr

Thanks for the feedback! I actually designed the slider with a larger tab initially, but after extensive testing, the taller tabs tended to snap off due to the added stress. The current version prioritizes durability while still being user-friendly. Appreciate the suggestion, though!

@user_3062319578

Print Profile

Uno express edition (tweaked settings)

the print wasn’t actually tall enough to fit my entire deck of cards but everything else is well designed. I also had small print quality inconsistencies with bumpy layers on this print (likely an issue with my printer) and I’m wondering if anyone has had the same problem?

@Jo90

this is the random seem feature. you can change it to an other option, but I personnaly prefer this option to the aligned one. Did you use it for Uno deck of cards.

@user_3062319578

Replying to @Jo90 :

Just wondering does using random seams have some sort of advantage? I did use it for Uno cards but I realized the print profile I used was a scaled down version which is my fault.

@Jo90

Replying to @user_3062319578 :

this is mainly a aesthetic thing. I personnally prefer this to the aligned one that look like a scar to me. I suppose there is also a strength gain as you scatter the weakness around rather than all in the same place, but I’m no engineer.😅

@Gusluke

Print Profile

0.16mm layer, 6 walls, 15% infill

So sorry for my unfair review, I was reckless. I adjusted my filament settings for the first 3 layers to no fan and slowed the fan for the rest, also added some brim and it worked flawless. Thanks and apologies again.

@GratianDmtr

You are funny🤣.There is a warp in your print. Clean your table and try again. Or change your printer.

@GratianDmtr

I'm glad it turned out well for you.

@Shaniela44322

Print Profile

0.16mm layer, 6 walls, 15% infill

super cool fits perfectly

@user_1641529466

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect design

@GratianDmtr

Thank you!👍🏻

@ktsglitterbar

Boosted

Print Profile

0.16mm layer, 6 walls, 15% infill

A bit of a snug fit so I did end up super glueing or together so that it doesn't pop open. So much better than the ziplock bag I was using before. I look forward to seeing you post the model for the Skip-Bo deck someone above requested

@GratianDmtr

I'm glad you like it. I just sent you the model for Skip-Bo.

@jamieskella

Boosted

Awesome, cheers.

The designer has replied

@GratianDmtr

Thank you!!

@ChicoQuente

Boosted

Print Profile

Multiple Sizes and TPU Sliders on High-Temp Plate

I love this design but most importantly my daughter does. Thanks for sharing!

@RevHazlett

Boosted

GRATiAN made an excellent model, I'm glad it printed well for you!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.