Pendulum Wave Toy with 2 pendula sets by 3DPrintBunny

3DPrintBunny

Household>Decor

IP Report

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

A1 mini

0.28mm layer, 2 walls, 20% infill

Designer

8.4 h

7 plates

4.8(27)

A1 Mini, Scaled 75%, 0.28mm layer, 2 walls, 20% infill

5.9 h

7 plates

4.3(6)

Open in Bambu Studio

Boost

577

953

828

237

Released

Description

A Pendulum Wave. Beautiful to watch.

It comes with two sets of Pendula and a pusher which slots into the base.

To assemble put an end cap onto the post and then all the pendula with spacers in-between. Add the second end cap and slot the post into the stand.

Make the pendula swing using the pusher or by simply sliding the stand forward and back.

Documentation (1)

Assembly Guide (1)

Pendulum Wave Instructions.pdf

Comment & Rating (37)

@ikizoglu

I wanted to try this model with my Bambulab A1 printer. You can check in picture, what was the problem? When the printing process came same level, printer was printing outside of borders. I couldn’t complete first stand part.

@user_2802533536

Print Profile

0.28mm layer, 2 walls, 20% infill

It printed perfectly, but I had to print some more rings to separate the pendula to keep them from hitting each other

@user_3415403724

Print Profile

0.28mm layer, 2 walls, 20% infill

This makes sense for 3d design and printing. I scaled it down 75% so it could be printed on a Bambu Lab A1 mini. Thanks for creating it.

@user_1224774144

Boosted

Print Profile

0.28mm layer, 2 walls, 20% infill

@wolfgamer

Print Profile

A1 Mini, Scaled 75%, 0.28mm layer, 2 walls, 20% infill

Amazing, realy mesmerising amazing apart from 2 things, the pole snapped and it was realy stiff at first so i had to sand it down but it is really cool

@Papa_Potter

I will edit the profile, and fix the issue with the part!

@wolfgamer

Replying to @Papa_Potter :

Ok thank you 😊

@simonprinting.

Boosted

Print Profile

0.28mm layer, 2 walls, 20% infill

@user_3130887351

Boosted

Print Profile

0.28mm layer, 2 walls, 20% infill

great

@J_O_E_L_J

Print Profile

0.28mm layer, 2 walls, 20% infill

cool

@btsailing2000

Print Profile

0.28mm layer, 2 walls, 20% infill

No issues.

@TheMessenger

I dont get what it means when it says user pusher, or move it back and forth to get them to swing like in the gif. Im still printing some of the pendulums, I just dont quite get how to make them swing in unison

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License

Related Models

Print Profile(2)

Description

Documentation (1)

Comment & Rating (37)

License

Related Models

The Great Wave Shadowbox

The Great Wave Music Box – Inspired by Hokusai

Waves Earrings

The Wave Bookmark Set - Kanagawa Inspired