Vacuumbag Valve/Pump Adapter by matziwe

matziwe

3D Printer>3D Printer Accessories

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.12mm layer, 2 walls, 15% infill

Designer

59 min

1 plate

4.8(52)

A1 Mini 0.12mm layer, 2 walls, 15% infill

1.1 h

1 plate

4.6(8)

PRINTDRY Vacuum (150%) [16x] (See Description for Details)

5.8 h

1 plate

5.0(1)

PRINTDRY Vacuum (150%) [4x] (See Description for Details)

1.5 h

1 plate

Open in Bambu Studio

Boost

180

315

265

Released

Description

Description:

I store most of my filament rolls in these “vacuum”-bags. When sucking out the air of this bag, the pump directly sits on the bottom of the bag and its very hard to get the air out. So, i designed this little adapter where the pump can lie on. Underneath the pump there are a few outlets to let the air flow through.

Printing:

Print the adapters as shown in the printing profile. Normally, you don't have to use supports to print it but the model will print cleaner if you do. I printed mine without supports.

Enjoying this model? Treat me to a coffee!

Comment & Rating (63)

@bogserle

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

Works great 👍🏻

Show original

@Laurent37FR

Print Profile

0.12mm layer, 2 walls, 15% infill

Successful first print without issue using black PLA-HA Anicubic filament They still need to be assembled Thank you for this model

Show original

@CtrlAltFck

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

Worked perfectly, these hard to use bags are suddenly easy to pump the air out of

@Lamics

Print Profile

0.12mm layer, 2 walls, 15% infill

nice project

@Savo222

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

Perfect! works like a charm with my pump adapter (on my profile)!

(Edited)

GIF

@jensdoelfel99

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

hat super funktioniert

@LinoRod

Print Profile

0.12mm layer, 2 walls, 15% infill

printed just fine

@Zasadinho

Print Profile

0.12mm layer, 2 walls, 15% infill

@jeremo1999

Print Profile

0.12mm layer, 2 walls, 15% infill

It didn't work for me, not sure if it is just my bags (although they look the same as in the creators pictures) or if my vacuum isn't strong enough or what