Fixed Angle Knife Sharpener

Included on the build plate is a full size block, an extension block, and a small block for pocket knives. All use 3x12 magnets that will need to be glued in. The upper block and lower block separate to allow for sharpening tall knifes and short knives. The small block was made for very small knives, but doesn't work as well as I had hoped. . This works great with the diamond rolling knife sharpener model that is designed by LOBOCnc. Here is the link to the rolling drum. https://makerworld.com/en/models/136529?from=search#profileId-148605

The advantage to the fixed block is being consistent between sharpening. The 15 degree is great for rough sharpening. The 20 degree works best for putting a clean edge on the knife. With this combo, you will have a sharpener as good as the $150 sharpeners on amazon. 

Legal Disclamer: 3D Printed Model

USE AT YOUR OWN RISK

By downloading, printing, or using any 3D model provided, you acknowledge and accept that you do so at your own risk. The creator of this model makes no warranties or guarantees regarding its safety, functionality, durability, or suitability for any specific purpose.

The creator assumes no liability for:

    •    Any damage to your 3D printer or other equipment.

    •    Personal injury, property damage, or legal issues resulting from the use or misuse of the model.

    •    Any modifications or alterations made to the original design.

It is your responsibility to ensure proper use and safety precautions, including:

    •    Verifying the model’s design for structural integrity.

    •    Using appropriate materials and print settings.

    •    Complying with local laws and regulations regarding 3D-printed items.

By using this model, you agree to release the creator from any and all claims, damages, or liabilities that may arise. If you do not agree to these terms, do not download, print, or use this model.