Mini's Display by Wickieprints

Wickieprints

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 20% infill

Designer

7.4 h

1 plate

5.0(6)

Open in Bambu Studio

Boost

394

620

178

Released

Description

We designed this display because we were running out of space at our booth. You can print it with or without supports. If you print without supports, the bottom side may not look as smooth as intended, but this won’t be noticeable once it’s in use. For a perfect finish, don’t forget to enable supports.

I print all my displays with PETG, ensuring strength and durability. Hopefully, you’ll find this display useful. Enjoy!

Comment & Rating (16)

@JeSTeRss

any possibility to make this have a door on the back so you can use it for storage to>?

The designer has replied

@JeSTeRss

this is really something i feel these displays lack the bookmark display i have would be super amazing if it could store bookmarks in the back to.....

@NickR1983

Maybe i can make a sliding piece in it? That you can slide in from the top? Only then i need to make the walls and floor a lot thicker? Would you like that one?

@JeSTeRss

Replying to @NickR1983 :

that would be godly :) please do maybe design some simple boxes that can stack inside the chamber i think you are onto a good design here now i need to find a bookmark display that can do these things

(Edited)

@monorail

Boosted

Print Profile

0.2mm layer, 3 walls, 20% infill

No problem, I've added some holes to… remove some filament… 😜 Hooray, thanks!

Show original

@user_3541780112

where is the leopard gecko from

The designer has replied

@NickR1983

3DGOB

@pumpkindragon11

yes where is the leopard gecko? He’s adorable.

@3dchick

Boosted

Print Profile

0.2mm layer, 3 walls, 20% infill

Great print thanks

@irekp

Cool model. I have an idea for modernization: cut it into three parts at an angle, add connectors and there will be no need for supports.

@ChibbiBibi

Boosted

Print Profile

0.2mm layer, 3 walls, 20% infill

@Dee3DM

Print Profile

0.2mm layer, 3 walls, 20% infill

@Whitekiller89

Print Profile

0.2mm layer, 3 walls, 20% infill

@pantera991

Print Profile

0.2mm layer, 3 walls, 20% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License