Packaging for a tailor's measuring tape by Capii

Capii

Tools>Measure Tools

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 20% infill

Designer

1 h

1 plate

4.7(117)

0.16mm layer, 2 walls, 15% infill - bigger, smoother move

1.1 h

1 plate

4.5(13)

Open in Bambu Studio

Boost

949

1945

160

1.7 k

1.2 k

Released

Description

Measuring tape reel. Adapted to a tape of approximately 16mm.
Assembly method:
-Place the measuring tape on the element to be taped in the dedicated groove
-Then extend the end of the tape through the housing
-Close the box carefully, pressing the housing lightly against the mechanism (the knob should be on the table side and the housing should be pressed from the top)

Comment & Rating (160)

@user_2376803400

Print Profile

0.16mm layer, 2 walls, 20% infill

printed nicely and functions well. The only thing I noticed is that it's easy to accidentally let the end of the tape fall into the casing, so I drilled a hole in mine and added a magnet to catch the metal end on my tape

@user_1525665170

Print Profile

0.16mm layer, 2 walls, 20% infill

Works great, Thank for sharing

@user_1415141753

Do you have the STL file?

Show original

@smigi13

Print Profile

0.16mm layer, 2 walls, 20% infill

ok, it is not good I fix it in my profile ;)

@Capii

oh apparently your measuring tape is wider than mine from the project. if you edit this project and put it as an edit here I will be grateful

@anweunna

Print Profile

0.16mm layer, 2 walls, 20% infill

Finally some order:-) A bit tight for my 2m band, I might print it a bit larger

Show original

@anweunna

I reprinted it at 110%, fitting perfectly for my tape measure with a length of 200 cm and a width of 1.8 cm

Show original

@viniclou

Boosted

Works perfectly!

The designer has replied

@Capii

Thx

@pct.foros

Print Profile

0.16mm layer, 2 walls, 20% infill

Good design

@crazy.horse

Boosted

Perfect, thank you

Show original

@samu_dus

Print Profile

0.16mm layer, 2 walls, 20% infill

Unfortunately too small, print quite good

Show original

@Moonshine42

Print Profile

0.16mm layer, 2 walls, 20% infill

Nice and simple. i love it.

@ACNet3D

Print Profile

0.16mm layer, 2 walls, 20% infill

Perfect

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Tailors Measuring Tape Storage

Shinzou

Packaging for a tailor's measuring tape

Capii

300

407

Measuring tape holder minimalist

Waveform Studio

107

153

Skadis Board 8m Tape measure Holder

Cranborile