3ml Vial Storage 8 Spot Triple Thread Jar Box by b-man

b-man

Household>Other House Models

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 10% infill

Designer

2.2 h

1 plate

4.5(2)

Open in Bambu Studio

Boost

Released

Description

8 Spot Vial Container for Peptides with triple threads. These threads make it a cinch to tighten.

I print it using 2 Walls and 10% infill. But I've printed it with no 0% infill with no problems.

Hope you enjoy it!

Comment & Rating (9)

@thebrownguy

Boosted

tried it three times, couldn't get a decent print out of it. print a benchy afterwards to see if it was me or the model, I think its the model. I tried on different plates, different bed settings, I'm just using standard black PLA, couldn't; do it.

The designer has replied

@thebrownguy

Boosted

I should mention I did enlarge it by 37% for 5ml vials

@user_523181125

Replying to @thebrownguy :

What was the difficulty with the print? If you're trying different plates and bed settings, it sounds like a bed adhesion problem. I just use the textured PEI plate. But I religiously clean it between every print. No iso alcohol. Only Dawn and a toothbrush. Then rinse it well and dry with a clean microfiber. No fingers on the print surface after that. I use the microfiber to set the plate back in place. Haven't had an adhesion problem since that routine. Let me know what specifically the issue was with your print.

(Edited)

@thebrownguy

Boosted

first fail was cheap filament fault on a diamond plate. second fail I used a brand new textured plate and a new filament, it adhered well but it produced terrible layers at the 30 min mark (purple) and then I tried it on a diff printer and it had the same result (gold). it’s almost like the layer is floating. tried it on two different printers with three filaments. I gave up

@blurple

Print Profile

0.2mm layer, 2 walls, 10% infill

@Lincotrane391

Print Profile

0.2mm layer, 2 walls, 10% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.