Dumpster Fire

Remixed by

WiWoody

Household>Decor

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

5.6 h

4 plates

3.3(3)

Open in Bambu Studio

Boost

109

Released

Description

Remixed from a model meant for resin printing. Adjusted the size, fixed and modified some parts. I used 3mm magnets however I am pretty sure 4mm fit the holes better. The top and bottom create secret compartments in the model. It uses 1 electric tea light that slides into the tea light ring you glue on the underside of the dumpster insert during assembly. Make sure detect thin walls is checked for the fire

dumpster fire

Comment & Rating (13)

@user_495923117

Print Profile

0.2mm layer, 2 walls, 15% infill

I only tried the fire but it failed every time I tried.

@David_K

make sure detect thin walls is checked for the fire. Make sure you have "Advanced" turned on in the Global options. It is in the "Strength" tab under "Walls".

@user_495923117

Replying to @David_K :

thanks for the advice, I give it a try.

@MartyM

Boosted

Everything except the flame printed well. Bambu software is not giving me the option to select detect thin walls.

The designer has replied

@David_K

Make sure you have "Advanced" turned on in the Global options. It is in the "Strength" tab under "Walls".

@MartyM

Boosted

Replying to @David_K :

Thank you, I don't know how I missed that it was not turned on when I originally went to print.

@HET127

Hi! In your picture what type of filament did you use for the fire? Did you enable supports on the fire? I am getting a floating cantilever warning on the flame when I try to print

The designer has replied