Solo Leveling Fanart Hueforge
Solo Leveling Fanart Hueforge
Print Profile(1)
Description
Solo Leveling Fanart Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.98mm
The Max Depth is 3.6mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Sunlu Matte Blue Transmission Distance: 3
PLA Bambu Lab Basic Gold Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 4.8
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #17 (1.38mm) swap to Beige
At layer #19 (1.54mm) swap to Blue
At layer #21 (1.7mm) swap to Gold
At layer #23 (1.86mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)