A display for figures that fits perfectly into an Ikea Kallax shelf.
The central columns connect two parts each. Additionally, up to 10 M6 screws and nuts are required to join the parts.

Total filament consumption: approx. 870g

When printing the individual parts:

• 1x hl3 (back-left), hr3  (back-right), vl3 (front-left), vr3 (front-right)
• 3x each other part

Assembly:
Saeule1 = Front Columns - screw into the front parts
Saeule2 = Middle Columns - screw into the back parts in the front
Saule3o & Saule3u & Verbindungsschraube-0.2 = Back Columns  - screw into the back parts in the back

If it wobbles, the individual columns can be screwed in a bit more or less until everything stands stable.