Miniature Terrain - Rock #8 by polyboris

polyboris

Miniatures>Other Miniatures

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.12mm layer, 2 walls, 10% infill

Designer

8.3 h

1 plate

4.9(23)

0.12mm layer, 2 walls, 10% infill

Designer

2.3 h

1 plate

4.9(15)

Open in Bambu Studio

Boost

813

1830

943

322

Released

Description

Membership

Show your support by becoming a member, or get the commercial license tier if you want to sell my prints!

Join

Miniature Rock for tabletop gaming, warhammer / DnD, or as others have pointed out, pet rocks.

Printed in Matte PLA. (BambuLab - Desert Tan)

Check out my other rocks if you like this one.

Boost Me (for free)

Want more rocks? Leave a rating & boost me so I can keep making free terrain!

Sculpting Timelapse

Edit #1 - 15/02/2025

Fixed bottom of the rock not being flat, causing the first layer to fail in some cases.
Decimated the mesh to be under 1M tris.

*Trooper mini not included, for scale reference only.

Comment & Rating (70)

@user_1796482904

I've tried printing the larger rock and it seems to not print the entire first layer of the rock closest to the glass door. and then after it does the first layer detection, it starts printing the next layer. It ultimately spaghettis. Anyone know why this might be happening?

The designer has replied

@boris3d

Hey, not sure as I only have an A1, if anyone can figure it out I can make any adjustment needed to the model to make it work on your printer.

@user_1796482904

Replying to @boris3d :

I might have had the A1 printer selected instead of the X1-Carbon. Still new to this!

@ozskeeter

have you tried "Lay on Face" inside Bambu studio?

@Dauntus

Amazing set! I burned through some extra PLA basic I had laying around to reuse the spools, and decided to full send into this set. They came out incredible! no rescaling, just printed everything as is in the profile. Thanks!

The designer has replied

@boris3d

yoooo first time seeing any of them painted! thank you so much for your comment and for showing them off. I have a new one coming soon. great paint job btw!

@Dauntus

Replying to @boris3d :

Of course! I had a buddy help and they also look good like this as well: They are so good man. keep them coming!

@TrashMammal

Boosted

Print Profile

0.12mm layer, 2 walls, 10% infill

prints perfectly with one support structure, a 25 mm base can move perfectly through the tunnel of love

@boris3d

Nice! Glad you like it! Thanks for sharing your tunnel of love 😂

@user_627910435

Print Profile

0.12mm layer, 2 walls, 10% infill

Came out great, no issues at all!

@boris3d

Looks great, thanks for sharing!

@THEuda

Boosted

Print Profile

0.12mm layer, 2 walls, 10% infill

A truly exceptional model

Show original

@Wisp

Print Profile

0.12mm layer, 2 walls, 10% infill

Thanks for correcting a mesh issue causing the first layers to fail earlier. This model is now printing great and looks cool.

@boris3d

The model has been updated last week, make sure you're getting the latest model.

@Wisp

Replying to @boris3d :

Thanks Boris! I’ve updated my review.

@boris3d

Replying to @Wisp :

Glad its working for you now!

@user_3204601199

Print Profile

0.12mm layer, 2 walls, 10% infill

@Raccoons_26

Print kept failing. Some parts that should be a part of the first layer starts printing on the second.

The designer has replied

@boris3d

Hey, not sure what might be the issue, what printer are you using? And are you using the slicer settings in the profile?

@Raccoons_26

I was using an A1 with the default settings. About 1/4th of the modes first layer was elevated enough to cause the print to fail. I had to go into the slicer and cut the first couple layers to get the model to print properly.

@boris3d

Replying to @Raccoons_26 :

The mesh had some problems and I have since updated the model to not have these issues.

@flanneldruid

Print Profile

0.12mm layer, 2 walls, 10% infill

solid terrain piece, printed perfectly

@boris3d

Glad you liked it!

@SylvainMorizot

Boosted

Print Profile

0.12mm layer, 2 walls, 10% infill

top

@boris3d

Glad you liked it!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License