Miniature Town Wishing Well Model Diorama by 3D Delight

3D Delight

Miniatures>Architecture

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.2mm layer, 2 walls, 9% infill

Designer

57 min

1 plate

4.5(11)

Open in Bambu Studio

Boost

229

543

190

108

Released

Description

Miniature Wishing Well | 3D Printable Model

Bring a touch of charm to your tabletop games, dioramas, or decorative displays with this beautifully detailed 3D printable wishing well. Designed for easy printing and assembly, this model captures the rustic feel of an old stone well, complete with a wooden roof, a crank handle, and a hanging bucket.

Features:

✅ High Detail: Realistic stone texture, wood grain, and structural elements for an authentic look.
✅ Multi-Purpose: Perfect for tabletop RPGs, dioramas, fairy gardens, or scenery building.
✅ Scalable: Print in different sizes to match your project needs.

Comment & Rating (14)

@caseywl

Print Profile

0.2mm layer, 2 walls, 9% infill

I was very careful and managed to keep the rope intact. Some layers lines in tops of rocks and roof that could probably be minimized with some tweaking of the profile.

@3ddelight

kudos. thanks for sharing.

@12Sandwiches

Print Profile

0.2mm layer, 2 walls, 9% infill

So cool, very detailed, the bucket and chain was a bit tricky. A dab of glue fixed that up super easy. Great design and another wonderful print for my A1 mini. Thanks for the upload!

@user_21354109

Print Profile

0.2mm layer, 2 walls, 9% infill

@541Richard

Print Profile

0.2mm layer, 2 walls, 9% infill

Strength Issue:the details on this model are tiny. the handle/crank, as well as the rope holding the bucket, broke instantly. I used flush cutters to remove the supports, to put as little strain on the thin pieces as possible, and they both broke before all of the supports were removed. there were also some weird stringing/drooping bits from the path that the print head took. I cut the sagging parts off, but you can still see the evidence below the roof. Not bad, but definitely not what I'd hoped for.

@magaman

what website did you design this on

The designer has replied

@3ddelight

Blender.

@user_102723677

Print Profile

0.2mm layer, 2 walls, 9% infill

@user_3435005473

Print Profile

0.2mm layer, 2 walls, 9% infill

@user_3294698520

Print Profile

0.2mm layer, 2 walls, 9% infill

@user_3842060066

Print Profile

0.2mm layer, 2 walls, 9% infill

@webpuppylodge

Print Profile

0.2mm layer, 2 walls, 9% infill

Support Issue:I wanted to love this, as I printef 25 of them for a kids project. unfortunately I couldn't salvage a single one of the buckets- they all broke trying to remove supports. but the rest of the well looked cute

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License