Planter Checkerboard Design

<ms/>

Household>Decor

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Planter | adaptive layer height, 3 walls, 0% infill

Designer

6.1 h

1 plate

4.9(14)

Tripod | 0.16mm layer, 2 walls, 15% infill

Designer

1.7 h

1 plate

4.8(12)

Open in Bambu Studio

Boost

300

622

238

Released

Description

This elegant planter is a complementing design to the lamp shades in the collection Lamp Designs by <ms/>.

The planter has the following size:

Height of 11.5cm
Height of 15.5cm with tripod

If you like this planter you might like some of my other planter designs:

Vase/Planter Designs by <ms/>

Tips for Printing:

I got the best results with the following setup:

Filament:
PolyTerra PLA (similar to Bambu Lab PLA Matte)
Extruder temperature:
230°C
Headed bed temperature:
30°C

Want to support me or sell my 3D models?

If you’d like to make a one-time donation, I would be incredibly grateful for your support on Buy Me a Coffee. Every contribution helps me keep creating! ☕✨
For ongoing support, or if you’re interested in selling my 3D models, check out my Patreon. Your support means the world to me! ❤️
The easiest way to support my work is through a MakerWorld boost. Even a small boost makes a big difference!

Boost Me (for free)

Every boost helps—thank you for your support! 🙌

Thank you so much for your support—whether it’s through donations, boosts, or simply appreciating and printing my work. It truly keeps me motivated to keep creating! 🥰

planter

Comment & Rating (42)

@user_3662310392

Printed solid and spent 273gr of material instead of 85gr

The designer has replied

@marcel_

🤯 So sorry this happened to you! Can you give me some more details? Did you print it directly from the Bambu Handy app? What kind of Printer do you have? I want to understand why this happened…

@user_3662310392

Replying to @marcel_ :

Hello... I printed from my Pc, I'm new into 3D printing, today is my 2nd day with a Bambu P1S combo, I didn't change any parameters except for the -hot end- came with A1in the menu, and I changed to P1S, sliced and go... run for 11 hours until this morning that I found this🫣🫨

(Edited)

@marcel_

Replying to @user_3662310392 :

Hello @user_3662310392 I don't own a P1S but tried it in the slicer. :) For me everything worked fine:

@Franz_mouttet

Boosted

Print Profile

Tripod | 0.16mm layer, 2 walls, 15% infill

I needed something to raise the moon lamp I just printed. Turns out your tripod is the perfect size for that. So thanks for this nice design!

@user_1417503660

Print Profile

Tripod | 0.16mm layer, 2 walls, 15% infill

Perfect complement to the pot

Show original

@user_1417503660

Print Profile

Planter | adaptive layer height, 3 walls, 0% infill

Absolutely superb as always

Show original

@cuypers

hey ther a question! i want to use plant pots pla to plant real plants in with like dirt and whatering them wil my pot not breake down after some time or will it stay good?

The designer has replied

@marcel_

No need to worry! This would take many many long years ☺️

@cuypers

Replying to @marcel_ :

owkay i trust you for that!! 😄

@tmayzious

you might want to double-check the profile you loaded up...

The designer has replied

@tmayzious

when I preview it in the app it's solid, there is no cavity where you would put the dirt and plant.

@marcel_

The 3D preview is solid, Yes! But this is intended. :) in the slicer the infill is set to 0%. and I set the number of walls to 3. because the actual 3-D model is solid, it allows you to configure the amount of walls you want in bamboo lab studio. TLDR: 3-D model is solid, but print is hollow

@user_242631356

Hello, why did my pot print solid? Where did I go wrong?

The designer has replied

Show original

@marcel_

Hello :) You probably changed the infill percentage. The provided 3mf file, has it set to 0%. Check if you changed this setting ;)

@Unknownboxy07

Print Profile

Planter | adaptive layer height, 3 walls, 0% infill

my mom loved it

@user_1328527665

Boosted

Print Profile

Planter | adaptive layer height, 3 walls, 0% infill

lovely model, thank you

@user_3892148736

Boosted

Grrreat

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License

Related Models

Print Profile(2)

Description