Toothbrush Travel Case by Joywent

Joywent

Household>Other House Models

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

31 min

1 plate

4.6(10)

High Adhesion, 0.2mm layer, 2 walls, 15% infill

32 min

1 plate

Open in Bambu Studio

Boost

138

142

101

Released

Description

This is a travel toothbrush case. To achieve a cute and refined aesthetic, the design features rounded, minimalist contours. To ensure strength at the hinge and clasp, the hinge is printed vertically, and the entire design is optimized around this approach—maintaining durability while ensuring a smooth and consistent exterior.

The case is printed in one piece without requiring any supports, using only 5g of filament and 30 minutes to print.

Comment & Rating (14)

@AdrianRR

The print profile is no longer public

Not perfect. Mayby adding supports would help with top layer.

@Joywent

Thank you for the feedback. I think I've identified the problem. The original placement angle I chose didn't take into account the impact on heat dissipation efficiency, resulting in insufficient heat dissipation for the half parallel to the X - axis. Now I've adjusted the model's placement angle and passed the test. At the same time, I've enabled variable layer height to further optimize the top - part printing effect. The printing profile has been replaced with the optimized one. Thank you!

@RB_DESIGNS

The print profile is no longer public

A+

@Joywent

Thank you for the 5-star review

@jonas2612

Print Profile

0.2mm layer, 2 walls, 15% infill

works perfect

Other Issues:For some reason it won‘t let me give 5 stars. BambuLab thinks. the print failed.

@zzzzzzx

Print Profile

0.2mm layer, 2 walls, 15% infill

good print

@Mixvis

Print Profile

0.2mm layer, 2 walls, 15% infill

parfait 👍🏼

@mrfedo

Print Profile

0.2mm layer, 2 walls, 15% infill

little bit tiny for my toothbrush

@BlinkShark91

Print Profile

0.2mm layer, 2 walls, 15% infill

The clasp is somewhat flimsy and opens very easily, even on its own

Show original

@karel.zone

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints fast, works good.

@DieterS

Print Profile

0.2mm layer, 2 walls, 15% infill

Fits perfectly and looks great

Show original

@user_2726165742

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License