Sun Fire fairy Coaster by Leafy

Leafy

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.08mm layer, 1 walls, 100% infill

Designer

2.2 h

1 plate

4.5(2)

Open in Bambu Studio

Boost

Released

Description

Sun Fire fairy

I own the license to the image.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 102.34x100mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black
    PLA Jayo silk Red
    PLA Geeetech silk Gold
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Red
    At layer #18 (1.52mm) swap to Gold
    At layer #23 (1.92mm) swap to Jade White for the rest.

Bill of Materials

Bambu Filaments

Jade White

A00-W1-1.75-1000-SPLFREE

19.99 USD

× 1

Black

A00-K0-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (8)

@user_909768933

This is the most beautiful thing I have ever printed!! Thank you!!

The designer has replied

Show original

@Leafy

Thank you 😊

Show original

@user_3461088857

Print Profile

0.08mm layer, 1 walls, 100% infill

the quality was not as good as expected unfortunately

@Leafy

did you use all the same filaments I listed. they don’t always work with other colour combos and different filaments.

@user_3461088857

Replying to @Leafy :

Not exact the same

@Leafy

Replying to @user_3461088857 :

the curling looks like a bed adhesion issue I’ve had this sometimes on my mini. try giving bed a good scrub and make sure printer isn’t in a draft as that’s what usually causes that.