Emoji Poop Chute Bin for P1S P1P X1C Remixed by 3D_Gauntlett

Remixed by

3D_Gauntlett

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

Poo Emoji variant 0.24mm layer, 2 walls, 15% infill

Designer

4.5 h

1 plate

4.8(55)

With magnet spaces 0.2mm layer, 2 walls, 15% infill

Designer

6.3 h

1 plate

5.0(7)

Open in Bambu Studio

Boost

146

338

226

Released

Description

This poop chute bin design for the P1S & X1C sits snugly around the side of the printer. It allows the poop to be seen and emptied when needed. I added an emoji poo to the front surface to amuse my children. It prints really well and has plenty of room for poop from multi-colour prints.

It looks particularly good in Matt PLA filament, such as the Charcoal.

If you print a lot of complex multi-colour prints with AMS and need a bigger bin, try this extra large version here. Alternatively, if you want something a little smaller that fits behind the printer and out of sight, try this one.

Bill of Materials

Maker’s Supply Kits and Parts

D10x2mm Round Magnet (20PCS) - CA016

B-CA016

2.99 USD

× 2

Bambu Filaments

Charcoal

A01-K1-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (84)

@web_Printer2030

Boosted

Print Profile

Poo Emoji variant 0.24mm layer, 2 walls, 15% infill

Turned out fabulous! I ran out of grey at perfect spot and inserted black to keep going and it made it custom cool!

@3D_Gauntlett

That looks great - it looks deliberate and almost like it's in two parts.

@web_Printer2030

Boosted

Replying to @3D_Gauntlett :

I know right?! The poop emoji was cute touch! Great job.

@EntropyRules

Boosted

Print Profile

With magnet spaces 0.2mm layer, 2 walls, 15% infill

I love it! It’s a perfect size, and the magnets hold it right above my anti-vibration feet. I printed it in glow-in-the-dark orange and it looks great.

@3D_Gauntlett

Love it! Vibrant!!

@themodler

Boosted

Print Profile

With magnet spaces 0.2mm layer, 2 walls, 15% infill

Great design,stellar print profile did not change a thing. Thank You

@3D_Gauntlett

Fantastic - looking great. Thank you for the Boost!

@Dr.Sommer

Boosted

Print Profile

Poo Emoji variant 0.24mm layer, 2 walls, 15% infill

perfect print, thank you very much

Show original

@3D_Gauntlett

Looks great! ;-)

@DRadz

Print Profile

With magnet spaces 0.2mm layer, 2 walls, 15% infill

This turned out very well! Great design!

@leonardo1216650

Print Profile

Poo Emoji variant 0.24mm layer, 2 walls, 15% infill

15 minutes into print

@3D_Gauntlett

Sorry to see your failure - very strange to happen in this print as it doesn't have any overhangs or need support. It looks like it failed in the early layers and came unstuck from the plate. Hopefully you can resolve the issue and print again as I don't think there is anything I can change to help.

@BobMcClane

Print Profile

Poo Emoji variant 0.24mm layer, 2 walls, 15% infill

excellent 👌🏼👍🏼

@user_1662148338

Boosted

Print Profile

Poo Emoji variant 0.24mm layer, 2 walls, 15% infill

@3D_Gauntlett

Looks great! Glad it printed well

@bobbi1977

How doe this secure to it? Or does it just sit on the back of the table? (Im looking for something that can be secured somehow and then wrap around to the table... as the printer is at the edge!

The designer has replied

@3D_Gauntlett

The original one is just designed to sit on the table at the same height as the printer. I've added a print profile with spaces for 10x3mm magnets which can then be glued in place. I'm not sure it will hold the weight of the bin + poop without any support underneath though. I didn't add magnet space on the side as I find it hard to get magnets to stick to the side unit of my P1S. The STL is there if you want to try yourself, if successful, please add a print profile. Good luck!

(Edited)