Stone Fairy Mother, beauty is paramount!

Despite the beatings, she never forgets her pursuit of beauty.

To enhance playability, I've redesigned it as a multipart model, with all parts rotatable (head, left arm, right arm, torso, lower body).

Printing requires minimal supports, and assembly is simple.

I will update with a dual-pose multipart version: a pointing-to-the-sky pose (“You wait for me, old hag!”) and a vomiting pose (with base). In this version, both ears will be separate pieces.

Adaptive layer height is set and z-seams are planned, resulting in relatively good print quality. Except for the mouth area, due to support influence, there may be minor flaws. These can be carefully trimmed and treated with a heat gun. Or you can leave them as is; it’s a stone figure after all~

Silk filament is recommended; its luster is quite pleasing.

Black is not recommended; it's simply too dark.

Initially, I found the ear leaves too fragile, so I reinforced them.

Also, for users with AMS, it's very convenient. I adjusted the angle and used layer height color separation, so the ears can be printed directly in green, eliminating the need for post-painting~

I hope your print goes smoothly!

Different materials have different properties, and printer/machine states vary. Joints may not perfectly fit. If too tight, apply some force and rotate several times; if too loose, add some glue.

The joints are only 4mm or 5mm in diameter, so a 10% infill won’t provide substantial strength. Do not force the parts.

Please also consider supporting my other models:

• Ascension Green Card (https://makerworld.com/zh/models/1066141)
• Forehead Wheel Earrings/Keychain (https://makerworld.com/zh/models/1068405)
• Magic Mirror (https://makerworld.com/zh/models/1074917)