Monitor Toy Holder V2

Kyn
Household>Office
Copyright Claim

Monitor Toy Holder V2

Kyn
Boost
61
117
11

Print Profile(1)

All
A1
P1S
P1P
X1 Carbon
X1E
X1
A1 mini
0.12mm layer, 2 walls, 15% infill
0.12mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
4.5(6)
Open in Bambu Studio
Boost
61
117
11
5
78
49
Released

Description

This is the V2 of the figurine holder for the monitor. First verison https://makerworld.com/en/models/1052050#profileId-1038973
This version is suitable for many monitors, due to the bolts that are screwed into the body of the holder, allowing it to be flexibly adjusted. 
The bolts are easy to screw in and out. 
The design is made in such a way that it does not obstruct the monitor. 

holder
Holder
monitor
display
toy
Toy
miniature
pop mart
Funko Pop

Comment & Rating (11)

(0/5000)
@Pyro89
Print Profile
0.12mm layer, 2 walls, 15% infill
printed great so I printed 7 more. the only thing that I would say needs a little more work is the flat surface where the model sits. it is quite uneven but with a little sanding it will be fine.
0
Reply
@EntombedSh4dw
Print Profile
0.12mm layer, 2 walls, 15% infill
Neat little print however the supports/texturing for the stand part was so messy im not sure ill print it again. maybe a suitable sized metal scraper would have been best to remove it more cleanly.
0
Reply
@Kynnei
Thanks for the feedback. Can you please attach a photo to see what the problem is? During my printing, the supports were easily coming off the model. There is a roughness on the model itself, you can see it in the photos.
0
Reply
@Kynnei
I reprinted after your comment to double-check everything. Everything printed successfully, exactly like the photo in the description. Below is a photo of the holder with the support torn off.
0
Reply
@EntombedSh4dw
Replying to @Kynnei :
was the support removed while warm or cold?
0
Reply
@Dwizzy72
Print Profile
0.12mm layer, 2 walls, 15% infill
Holes were loose. Had to use tape on the screws to get a better fit.
0
Reply
@Kynnei
I'm sorry the opening was too wide. Can you please attach a photo? So I can understand the reason why At the time of my printing, the bolts also didn't sit a bit loose, but it's enough to confidently hold the figures.
0
Reply
@user_1171260470
Boosted
Print Profile
0.12mm layer, 2 walls, 15% infill
worked well, no strining, supports came off easily, threads worked first time
0
Reply
@Nickutta
Print Profile
0.12mm layer, 2 walls, 15% infill
0
Reply
@user_1553290612
Boosted
Print Profile
0.12mm layer, 2 walls, 15% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Dragon Monitor Risers

Dragon Monitor Risers

malebuffy
20
454
263
Shelf under the monitor

Shelf under the monitor

mawik
4
33
42
Monitor riser

Monitor riser

mikeleg.v
0
47
28
Monitor riser

Monitor riser

Patrickmodular
0
17
5
PrivacyTermsGuidelinesFAQCookie SettingsHot Searches
© 2025 MakerWorld