A configurable Magic the gathering poker chip set with a print in place case that latches shut. 

Each color and value has its own plate consisting of 25 chips. Print what you desire to use for your poker chip set and ignore the rest. If you want to have your set exclude a color or a number, then go for it! 

Colors used: black, red, blue, gray, white, yellow, and green. You only need one AMS for this print.

Each color has 5 variants with the values of 1, 5,10, 25, and 100. All on separate plates with 25 on a plate.

I have uploaded a stand alone profile for the case because it can't have the prime tower enabled, it's too chonky. 

The case is able to fit every chip. If not all of them fit it is probably caused by an imperfection on one of the chips, try to find it and shave off any extra material.

Note: If you have problems with the bridges on the case then try lowering the bridge print speed or the bridge flow.

I do not personally know much about Mtg and I was asked to make this.

I welcome feedback and suggestions. 

If there is a desire I can design a new smaller case to make a mana tracking system with the chips.