Print Profile(1)
Description
Hello 3D printing friends!
😀Here you will find a beautiful sewing machine lamp that you can easily print yourself.
Recommended print settings:
Main part: For best details, ideally print the main part with a layer height of 0.16 mm. To save time, you can go up to a maximum of 0.2mm
Back panel: Ideally 0.20 mm here. MAX 0.24!!
Diffuser: This variant ensures a soft light distribution, which makes the light more atmospheric.
The back panel does not sit so firmly because I glue it firmly before selling it. Thus, the assembly of the back panel is easier for me. You can enlarge the back panel by 0.5% and see if it sits a little tighter then.
- The support for the LED strips should be glued firmly with some plastic adhesive.
- Then you have to insert the LED strips. Since most LED strips adhere to the back, I use the supports to prevent them from detaching again due to the heat generated by the COD LED strip.
- The LED strip should be at least 74cm long
I wish everyone a lot of fun printing and report on your results ♥️
Information on the commercial license:
License for sale? You can find it here!
Commercial licenses are now available via Patreon at https://www.patreon.com/c/Westtech3D
Bill of Materials
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)