Wolverine
Wolverine
Print Profile(1)
Description
----------------------------
My designs are for personal printing use only.
A commercial license to sell printed copies of my Makerworld Designs is available.
I also post exclusive designs on my Patreon. A commercial license to sell BOTH my Makerworld and Patreon files can be found here: https://www.patreon.com/busykikibee
----------------------------
Wolverine bears his claws, ready for action in this 6 color print!
----------------------------
My designs are for personal printing use only.
A commercial license to sell printed copies is available on my Patreon:
https://www.patreon.com/busykikibee
Patreon members also have access to exclusive designs available only on Patreon.
---------------------------
And check out another version of Wolverine Cross Claws on my Patreon!
Pictured frame, stand, or puzzle box can be found in Frames and Functional items over @CanadianGamer https://makerworld.com/@CanadianGamer/collections/1027330
All photos you see are of actual prints of my design. If you use the same filament and colors, you can expect the same result as you see in the photos. The 3mf file is AMS ready to slice and print with the height range modifier and layers prepared for you. If you are using the STL to slice and print the file, be sure to apply color swaps by their mm height and use the height modifications and infill instructions as per the directions provided. During slicing, you might get an error message about floating regions, which you can safely ignore. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing!
Project: Wolverine
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
This print uses 6 unique filaments
PLA BambuLab Basic Black
PLA BambuLab Basic Cocoa Brown
PLA BambuLab Basic Red
PLA BambuLab Basic Yellow
PLA BambuLab Basic Light Gray
PLA BambuLab Matte Ivory White
Swap Instructions:
Start with Black
At 0.8mm swap to Cocoa Brown
At 0.88mm swap to Red
At 1.28mm swap to Yellow
At 1.68mm swap to Light Gray
At 1.92mm swap to Ivory White for the rest.
All photos you see are of the actual print of my design. If you use the same filament and colors, you can expect the same result as you see in the photos. The 3mf file is AMS ready to slice and print with the height range modifier and layers prepared for you. If you are using the STL to slice and print the file, be sure to apply color swaps by their mm height and use the height modifications and infill instructions as per the directions provided. During slicing, you might get an error message about floating regions, which you can safely ignore. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing!
Membership
My designs are for personal printing use, but if you would like to sell them, I offer TWO Commercial License options: 1. Sign up for my Makerworld Commercial License to sell only the designs that are available here on Makerworld. 2. OR you can join my Patreon where I regularly post Exclusive designs. A Patreon commercial license allows you to sell BOTH my Makerworld and Patreon designs -> https://patreon.com/BusyKikiBee
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)