S25 Ultra HEX Honeycomb case cover by Sanja 3D

Sanja 3D

Hobby & DIY>Electronics

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

2 plates

4.7(15)

Open in Bambu Studio

Boost

117

338

233

Released

Description

I have designed HEX / Honeycomb version of a protective case for the Samsung Galaxy S25 Ultra—optimized for PLA or PETG printing. The Case provides a tight fit and have been tested and refined through multiple iterations to ensure a perfect match for the phone.

Each case comes with a camera lens protector that features a slightly raised edge to prevent scratches on the camera lenses.

The Case have been tested and adjusted to ensure the best fit and functionality.

Comment & Rating (25)

@dtm247

Print Profile

0.2mm layer, 2 walls, 15% infill

very good case! good job with the tolerances and design

@PJs_3D_Prints

I'd print this in TPU, otherwise you're gonna damage your new phone

The designer has replied

@Sanja3D

Plastic cannot scratch metal—at least, that's what some laws of physics say. Also, a phone is not painted but anodized. A 3D-printed case is safe to use with any type of plastic. I personally use one printed in PETG and have put it on and taken it off 30 times while adjusting the dimensions, with no issues at all. Please make sure to inform yourself before leaving comments.

@Braedenmk7

Replying to @Sanja3D :

SAVAGE respect

@PJs_3D_Prints

Replying to @Sanja3D :

ok best of luck 😄

@user_4242976799

Just got my phone. this was the first print I made. I was down to bare bones filament and wanted a nice case that was light on filament. I printed this one in galaxy purple with galaxy black for the camera accent. it's BEAUTIFUL. I used 3g for the accent part and just under 30g for the case itself. I had just enough black left to not trip my FROD and the same with the purple. Thank you for a PERFECT design. - the case has a lip so the glass does not sit flat on the desk - The case is thin enough that the wireless chargers still work - The press in design actually presses in snugly - the press in design ALSO has a little lip so the camera doesn't sit flat on whatever surface you put it on reducing the risk of scratches. love this design!

@onurccn

Boosted

Great fit. Printed in PLA, really easy to take it off and on again thanks to the gaps at the bottom. Thanks for the model!

(Edited)

@Garfield_2024

Boosted

This print came out AWESOME, Printed on my A1 straight PLA. Great job!

(Edited)

@user_3556323410

could you make one for the Fold 6?

@glencouls

Print Profile

0.2mm layer, 2 walls, 15% infill

great print. tight fit. make sure you clean out all supports really well .

@ThemeDex

I printed in TPU because I wanted it a little grippier and absorbent (in case of a drop) and it went on well, though it was a little loose. I have a different case coming soon, so it was good enough for what I needed. The holes all had good clearance for the buttons/cameras. Thanks for the design! It looks great on my phone, and I love that I can still see some of the phone color through the back. For anyone printing this for more long-term use, I would scale it back ever-so-slightly to make it a snugger fit. You might have to adjust the holes, but I think there is enough play for a very small adjustment. YMMV.

@Otomar

We need the same for S24 ultra, please.

@MarcelBalschuwe

Print Profile

0.2mm layer, 2 walls, 15% infill

Looks very nice and fits well 😌

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.