AMS saver Disc to prevent jams by Bliv

Bliv

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.28mm layer, 2 walls, 15% infill

Designer

38 min

1 plate

4.8(10)

Open in Bambu Studio

Boost

135

134

Released

Description

After using the AMS feeder savers i found most designs seem to cause feeder jams when feeding from the edge of the spools due to the head catching up in spool slots and holes.

I designed these discs / Lollipop shaped heads so that there is no corners or other edges that can jam up in the spools.

Should be a firm fit on standard Bambu PTFE tubes, and use with AMS feeder savers such as this one from 3D-Vizja
https://makerworld.com/en/models/814744#profileId-756764

ams

ams saver

ams guide

Comment & Rating (12)

@user_2988818463

Print Profile

0.28mm layer, 2 walls, 15% infill

printed out awesome

@HoopFit85

I’m having the same issue with AMS overloads. any chance you could split this design in half so we could add some material to clean the filament? or is that already possible with this one somehow? thank you! this looks like a great solution :)

The designer has replied

@Bliv

hi, im not really sure its thick enough but if you wanted to do that you could probably get a small square of gauze or similar pad and put it before the saver, wrapped around the filament with something like a garbage bag wire tie. the filament would be dragged through the cleaning pad as it enters the saver.